ADVANTECH PCL-858A
Specifications
Bundled Software
ICOM Tools
Card Interface
ISA
Certifications
CE
Connectors
1 x DB62-F
Data Bits
5, 6, 7, 8
Data Signals
RS-232:Tx, Rx, CTS, RTS, DTR, DSR, DCD, GND; RS-232:Tx, Rx, CTS, RTS, DTR, DSR, DCD, GND; RS-422:Tx+, Tx-, Rx+, Rx-, GND, CTS+, CTS-, RTS+, RTS-; RS-485:Data+, Data-, GND
Dimensions
185 x 100 mm (7.3" x 3.9")
I/O Address Range
From 000H to 3FFH
IRQ
3, 4, 5, 6, 7, 9, 10, 11, 12, 15
Parity
None, even and odd
Ports
8
Power Consumption
+5 V @ 450 mA typical, 950 mA max.; ±12 V @ 140 mA typical, 240 mA max
Software Driver Support
Windows 98/ME/2000/XP/Linux
Speed
50 ~ 921.6 kbps
Stop Bits
1, 1.5, 2
Temperature
Operating:0 ~ 60°C (32 ~ 140°F); Storage:-25 ~ 80°C (-13 ~ 176°F)
UART
2 x 16C554
Datasheet
Extracted Text
8-port High-speed RS-232 PCL-858 Series Communication Card Features • Eight independent RS-232 serial ports • Transmission speed up to 921.6 Kbps • Independent I/O addresses, shared IRQ settings for each of 8 serial ports • Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12, 15 • Supports DOS/Windows 3.1 (PC-ComLib), Windows 95/98, Windows NT (ICOM Utility) • Supports surge protection: 3000 VDC (PCL-858B/858+) • PC-ComLib software and ICOM Utility included Introduction • Speed: 50 ~ 921.6 Kbps PCL-858 series interface cards provide eight RS-232 serial communication ports. Each port can be configured individually using • Data signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND on-board jumpers. PCL-858A/858B cards each have two 16C554 DC • Surge protection: 3000 V (PCL-858B/858+) 6 UARTs, which make serial I/O more reliable. The higher performance • Power consumption: PCL858+ has two 16C654 UARTs. By buffering data into 64-byte +5 V @ 450 mA typical, 950 mA max. packets before putting it on the bus, UARTs drastically reduce the ±12 V @ 140 mA typical, 240 mA max. CPU load. This makes the PCL-858+ especially suitable for high- speed serial I/O applications under multitasking environments and for • Dimensions: 18.5 cm × 10.0 cm applications involving high data rates. • Operating Temperature: 0 ~ 60° C (32 ~ 140° F) PCL-858 series cards support automatic addressing for all eight • Storage Temperature: -25 ~ 80° C (-13 ~ 176° F) ports. All channels share the same interrupt (IRQ), and an interrupt status register can be used to determine the interrupt source. When Ordering Information an on-board interrupt occurs the interrupt status register (vector � � � � � PCL-858A: 8-port high-speed RS-232 interface card (must address) indicates which port generated it. The shared interrupt can choose Opt-8X) be set to most common (extended) AT interrupts. This simplifies programming, speeds up interrupt processing and frees up � � � � � PCL-858B: 8-port high-speed RS-232 interface card w/surge interrupts for other devices. protection (must choose Opt-8X) � � � � � PCL-858+: 8-port high-speed RS-232 interface card w/surge Each card comes with DOS drivers, a serial communication library protection and 16C654 UART (must choose Opt-8X) called PC-ComLIB, and a Windows 95/98/NT configuration utility. The PC-ComLIB package also includes the DataScope data viewer and � � � � � Opt-8A: 8-port RS-232 (DCE) connection box with female DB-25 terminal emulator with self-diagnostics utilities for easy connector troubleshooting and debugging. � � � � � Opt-8B: 8-port RS-232 (DTE) connection box with male DB-25 connector Specifications � � � Opt-8C: 8-port RS-232 connector cable with male DB-25 � � connector (1 m length) • Bus interface: ISA � � � � � Opt-8G: 8-port RS-232 connector cable (30 cm) with male DB-25 • Number of ports: 8 connector • I/O address range: From 000H to 3FFH • IRQ: 3, 4, 5, 6, 7, 9, 10, 11, 12, 15 • Data bits: 5, 6, 7, 8 • Stop bits: 1, 1.5, 2 • Parity: None, even, odd • UARTs: 2 × 16C554 (PCL-858A/858B) 2 × 16C654 (PCL-858+) Daughterboards and Modules www.advantech.com 6-11 Industrial Communication
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the PCL-858A?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods