PCA-6184 Socket 478 Pentium 4 SBC with VGA, Dual Ethernet and HISA PCA-6184 Socket 478 Pentium 4 SBC with VGA, Dual Ethernet and HISA Startup Manual Packing List Specifications Before you begin installing your card, please make Standard SBC Functions sure that the following materials have been shipped:  CPU: Socket 478 for Intel® Pentium® 4, FSB 400MHz • 1 PCA-6184 socket 478 Pentium 4 processor-based  BIOS: Award 4 Mb Flash memory BIOS single board computer  Chipset: Intel 845  1 FDD cable p/n: 1701340703  System Memory: Two 184-pin DIMM sockets accepts  2 Ultra ATA 66/100 HDD cables p/n: 1701400452 up to 2 GB DDR  1 printer (parallel port) and  Enhanced IDE interface: Supports up to four EIDE COM port cable kit p/n: 1701260305 devices. BIOS auto-detect, PIO Mode 4, Ultra ATA 100/ 66/33 transfer  1 ivory cable for PS/2 keyboard and PS/2 (optional) p/n: 1700060202  FDD interface: Supports up to two FDDs  1 USB cable (optional) p/n: 1700100170  Serial ports: Two serial RS-232 ports  1 single-slot bracket (optional) p/n: 1962159010  Parallel port: One parallel port, supports SPP/EPP/ ECP mode  1 PCA-6184 startup manual  Keyboard/mouse connector: Supports one standard  CD disc and manual (in PDF format) PS/2 keyboard and a PS/2 mouse  Warranty certificate  Watchdog timer: 255 level timer intervals If any of these items are missing or damaged, contact  USB: Four Universal Serial Bus ports your distributor or sales representative immediately. VGA/LCD Interface Note 1: For detailed contents of the PCM-6184, please refer to the enclosed CD-ROM or disk  Chipset: ATI 3D Rage 128 Pro 4XL, 32 MB SDRAM (in PDF format).  Interface: AGP 4x Note 2: Acrobat Reader is required to view any PDF Ethernet Interface file. Acrobat Reader can be downloaded at: www.adobe.com/Prodindex/acrobat/read-  Chipset: Intel 82559 step.html (Acrobat is a trademark of Adobe.)  Ethernet interface: Dual PCI 10/100 Mbps Ethernet, IEEE 802.3U protocol compatible  Connection: On-board RJ-45 connector x 2 Mechanical and Environmental  Dimensions (L x W): 338 x 122 mm  Power supply voltage: +5 V ± 12 V  Power requirements: Typical, +5V: 7.40A, +12V:320mA (Intel Pentium(R) 4 1.8GHz 256 MB DDR266) For more information on this and other Advantech products, please visit our website at:  Operating temperature: 0 ~ 60°C (depending on CPU) http://www.advantech.com Weight: 0.5 kg (weight of board) http://www.advantech.com/nc For technical support and service, please visit our support website at: http://support.advantech.com This manual is for the PCA-6184 series Rev. A1. Part No. 2002618411 2nd Edition Printed in Taiwan June 2002 PCA-6184 Startup Manual 1 Jumpers and Connectors J1: CMOS clear function Closed pins Result The board has a number of jumpers that allow you to 1-2 (open) Keep CMOS data* configure your system to suit your application. 1-2 (close) Clear CMOS The table below lists the function of each of the jump- ers and connectors. Label Function J1 CMOS clear J2 Watchdog timer output selection Label Function J2: Watchdog timer output option CN1 Primary IDE connector Pins Result CN2 Secondary IDE connector 1-2 RQ11 CN3 Floppy drive connector 2-3 System reset * CN4 Parallel port CN6 USB port CN7 VGA connector CN8 10/100Base-T Ethernet connector 1 CN9 Serial port: COM1 CN10 Serial port: COM2 CN11 PS/2 keyboard and mouse connector *default setting CN12 External keyboard connector Note: (Only applies to PCA-6184E2-00A1) If your system CN13 Infrared (IR) connector has only one unused expansion slot to accom- CN14 CPU FAN connector modate the CPU card, you can replace the CN16 Power LED standard dual-slot bracket with the single-slot CN17 External speaker bracket included in the package. CN18 Reset connector CN19 HDD LED connector CN20 ATX feature connector Software Installation CN21 ATX soft power switch CN22 HW Monitor Alarm The CD disc contains a driver installer program that Close: Enable OBS Alarm Open: Disable OBS Alarm will lead you through the installation of various device drivers needed to take full advantage of your CPU CN27 Extension I/O board connector card. CN28 Extension I/O board connector CN29 SM BUS Connector CN46 Auxiliary 4-pin power connector Caution Extension I/O board The computer is provided with a battery-powered Daughter board 1 Real-time Clock circuit. There is a danger of explo- CN31 USB port 0, 1 sion if battery is incorrectly replaced. Replace only CN32 USB port 2, 3 with same or equivalent type recommended by the CN33 PS/2 mouse connector manufacturer. Discard used batteries according to CN34 10/100Base-T Ethernet connector 2 manufacturer's instructions PCA-6184 Startup Manual 2 Location of PCA-6184's jumpers and connectors 3 PCA-6184 Startup Manual CN29 CN10 CN1 CN18 CN3 CN2 CN21 CN4 DIMM1 CN6 CN19 CN20 CN16 DIMM2 CN17 J1 CN14 CN22 CN9 J2 CN13 CN46 CN27 CN8 CPU CN28 CN7 CN12 CN11 Extension I/O daughter board PCA-6184 Startup Manual 4