ADVANTECH MIC-5601
Specifications
BIOS
AMI (1. Dual images with update rollback, 2. CMOS settings can be changed over IPMI, and 3. CMOS backup works without battery)
Chipset
Intel 3100
Ethernet
Intel 82571EB dual-port Gigabit Ethernet controller.
Form Factor
Mid-size, single width. AMC.0 compliant.
Mass Storage
1GB industrial grade internal flash disk (used as NV storage, emergency boot disk or diagnostics boot media). Optional expansion board with CF type-1 socket.
Memory
DDR2 400 with ECC. Max. 1 GB
Processor
Intel Celeron M ULV (373) or Pentium M LV (738) up to 1.4 GHz
SATA Interface
Two SATA interfaces to common ports region 2-3.
Serial Interface
Routed to front panel as USB Slave interface through onboard USB to Serial converter
USB Interface
One USB 2.0 compliant host port (standard USB Connector) on front panel. Two USB 2.0 ports connect to rear AMC edge connector.
Features
- (mini-USB) to front panel
- 1 GB DDR2 400 MHz SDRAM with ECC
- AMC connector routes dual Gigabit Ethernet SerDes (x2), SATA (x2),
- AMC.0, AMC.1, AMC.2 and AMC.3 compliant
- Boot from network, CompactFlash, SATA, USB or onboard flash disk
- Intel 3100 chipset 400/533 MHz FSB
- One Gigabit Ethernet (RJ-45), one USB 2.0 port, and one console port
- Supports Intel® Pentium M processor Low Voltage or Celeron M processor Ultra Low Voltage
- Supports IPMI v1.5 and Serial-over-LAN function
- USB (x2), dual PCIe x4, or single PCIe x8
Datasheet
Extracted Text
Advanced Mezzanine Card ® ® MIC-5601 Intel Pentium M Processor AMC Features ® ® ® Supports Intel Pentium M processor Low Voltage or Celeron M processor Ultra Low Voltage ® Intel 3100 chipset 400/533 MHz FSB 1 GB DDR2 400 MHz SDRAM with ECC One Gigabit Ethernet (RJ-45), one USB 2.0 port, and one console port (mini-USB) to front panel AMC connector routes dual Gigabit Ethernet SerDes (x2), SATA (x2), USB (x2), dual PCIe x4, or single PCIe x8 Boot from network, CompactFlash, SATA, USB or onboard flash disk Supports IPMI v1.5 and Serial-over-LAN function AMC.0, AMC.1, AMC.2 and AMC.3 compliant RoHS COMPLIANT 2002/95/EC Introduction The MIC-5601 is a highly integrated single-width, mid-size, processor AMC. Its design is based on the low-power, high-performance Intel Celeron M ULV and Pentium M LV processors combined with the high-performance Intel 3100 chipset. The board includes 1 GB of soldered DDR2 400 MHz memory with ECC for higher MTBF and optimum cooling. To facilitate development, test and integration while offering typical network connectivity once deployed, the front panel provides a gigabit Ethernet connector, a serial port and a USB 2.0 host port. The MIC-5601 maximizes AMC edge connector connectivity for the best design flexibility. When redundancy or two separate interconnects are required, the board can be configured with two PCI Express x4 ports or with a single PCI Express x8 port when throughput is essential. Two gigabit Ethernet ports provide AMC.2 compliance and offer control and data plane connectivity to facilitate the migration of existing applications. Both ports connect to the 3100 chipset via PCI Express for maximum data throughput. Dual SATA interfaces provide AMC.3–compliant storage and two USB ports offer further connectivity opportunities. A dedicated Module Management Controller (MMC) monitors onboard conditions and manages hot swap operation for field upgrades or module replacement without the need to power down the underlying system. Specifications CPU Intel Celeron M ULV (373) or Pentium M LV (738) up to 1.4 GHz Chipset Intel 3100 Processor System AMI (1. Dual images with update rollback, 2. CMOS settings can be changed over IPMI, and 3. CMOS backup works BIOS without battery) Front Side Bus 400/533 MHz Bus PCI Express PCI Express rev1.0a : one x8 and two x4 routed to AMC connector Technology DDR2 400 with ECC Memory Max. Capacity 1 GB Controller Intel 82571EB dual-port Gigabit Ethernet controller (supports 802.3d compliant link aggregation) Ethernet Interface One GbE accessible on front panel via RJ-45 and two SerDes links to AMC common options region ports 0 and 1 CompactFlash Optional expansion board with CF type-1 socket Mass Storage Onboard 1GB industrial grade internal flash disk (used as NV storage, emergency boot disk or diagnostics boot media) AMC Edge Connector Two SATA interfaces to common ports region 2-3 SATA Interface Other One SATA routed to CF daughter board Serial Interface I/O Routed to front panel as USB Slave interface through onboard USB to Serial converter I/O One USB 2.0 compliant host port (standard USB Connector) on front panel USB Interface AMC Edge Connector Two USB 2.0 ports connect to rear AMC edge connector Watchdog Timer AMC compliant watchdog Hardware Monitor Controller IPMI v1.5 compatible MMC Source Code Pigeon Point System-based Firmware Update Standard HPM.1 compliant Operating System Compatibility Carrier Grade Linux (Wind River Platform for Network Equipment, Linux Edition 2.0) AMC Mid-size, single width Form Factor Interface AMC.0 compliant Miscellaneous LEDs x1 blue for hot swap, x1 red/amber for failure and OOS, x1 green for general purpose Configuration Pentium M 738 LV + 3100 + 1 GB on-board DDR2 SDRAM Power Requirement Consumption 31.2 watts All product specifications are subject to change without notice Last updated : 17-Jun-2010 MIC-5601 Block Diagram COM2 IPMB-L Pentium M MMC Celeron M 1GB Flash Disk DDR PLL (option expansion Module) USB1 SATA21 SATA to PATA DDR2 CF Disk c DDR-II Converter DRAM c r LPC AMC Con FWH TPM (optional) Intel 3100 USB2 & USB3 Port 16 SATA 0 & SATA1 Ports 2,3 USB-Serial Mini USB COM1 One PCIe x8 or two PCIe x4 Ports 4..11 IMCH Converter Con. PCIe x4 SERDES USB0 Ports 0,1 USB Con. IICH Dual GbE RJ45 w/ X’mr FrontPanel Clock Generator DC/DC Converter Physical Dimensions 180.6 mm x 73.5 mm Operating Non-operating Temperature -5 ~ 55° C (23 ~ 122° F) Note 4 -40 ~ 70° C (-40 ~ 140° F) Humidity IEC60068-2-78 (95%RH @ 40° C) Environment 2 Vibration (5 ~ 500 Hz) IEC60068-2-6 ( 0.002 G /Hz, 1 Grms) Shock IEC60068-2-27 (10 G, 11 ms) Altitude 300 m below sea level to 4,000 m above sea level 10,000 above sea level Conformance UL94V0, FCC Class B, CE, RoHS & WEEE Ready Regulatory NEBS Level 3 Designed for GR-63-CORE and GR-1089-CORE Compliance Standards PICMG AMC.0, AMC.1, AMC.2, AMC.3, IPMI v1.5, HPM.1 Ordering Information On-Board Option Model Number CPU Memory MIC-5601A-M1E Pentium M LV 1.4 GHz (738) 1 GB DDR2 with ECC MIC-5601B-M1E Celeron M ULV 1 GHz (373) 1 GB DDR2 with ECC Notes: 1. TPM support will be available as an option. 2. Full size front panel design will be available upon request. 3. CF module available as an option. 4. Operating Temperature: depending on the actual air flow through the AMC slot Online Download www.advantech.com/products FSB
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the MIC-5601?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods