ADVANTECH MIC-5320
Specifications
BIOS
Dual 16-Mbit BIOS firmware flashes with AMI embedded BIOS
BUS QPI
5.86 GT/s
Environment
Operating Temperature: 0 ~ 55° C (32 ~ 131° F)
Ethernet
2 10/100/1000BASE-T through PCIe based i82576 MAC/PHY, 1 10/100/1000 Mbps Chipset LAN
Memory
Triple channel DDR3 1066 MHz SDRAM (72-bit ECC Un-/ Registered). Configurable up to 48 GB.
PICMG
3.0 R3.0, 3.1 R1.0, AMC.0 R2.0, AMC.1 R2.0, AMC.2, AMC.3, HPM.1
Processor
E5540 (4C/8T) (not NEBS compliant) or L5518 (4C/8T) or L5508 (2C/4T) Intel Nehalem processor
Serial
2 x86 Serial Ports (1 RJ-45 connector, 1 miniUSB connector)
SSD
Two 1GB USB flash disks onboard
Storage
LSI 1064E onboard SAS controller with four ports up to 3 Gb/s
Features
- 6 DDR3 VLP DIMMs up to 48 GB with ECC support
- Fully managed, hot swappable RTM
- Intel® 5520 IOH36D / ICH10R server class chipset
- Onboard serial attached SCSI (SAS) controller with failover support
- One Dual-Core or Quad-Core Intel® Xeon 5500 processor (Nehalem-EP)
- One mid size AMC slot with SAS/PCIe/RTM/CLK support
- Three 1000BASE-T front panel ports
- Two 1000BASE-T ports on Base interface
- Two XAUI ports on Fabric interface
Datasheet
Extracted Text
® AdvancedTCA 10GbE CPU Blade with ® ® MIC-5320 Intel Xeon 5500 Series Processor NEW Features ® One Dual-Core or Quad-Core Intel Xeon 5500 processor (Nehalem-EP) ® Intel 5520 IOH36D / ICH10R server class chipset 6 DDR3 VLP DIMMs up to 48 GB with ECC support Two XAUI ports on Fabric interface Two 1000BASE-T ports on Base interface Three 1000BASE-T front panel ports One mid size AMC slot with SAS/PCIe/RTM/CLK support Onboard serial attached SCSI (SAS) controller with failover support Fully managed, hot swappable RTM Introduction ® ® Advantech’s MIC-5320 single-slot AdvancedTCA processor blade combines computing performance with I/O flexibility in a power efficient design. Supporting Intel’s latest Xeon processors using the new Nehalem microarchitecture and latest DDR3 technology with a 3 channel memory controller integrated into the CPU, the MIC-5320 outperforms previous generation dual socket designs while providing better thermal characteristics. With built-in next generation processor readiness, there is a smooth upgrade path to future processors supporting more than 4 cores. Using Intel’s latest GbE and 10GbE MAC solutions supporting enhanced offloading techniques and virtualization features, MIC-5320 allows users to deploy the full power of multi- core technology. All in all by combining the latest multi core technology, low latency / high speed DDR3 technology, and latest 10GbE technology, MIC-5320 is well suited for high speed data plane applications. Supporting up to 48 GB of memory it can run database in memory applications easily. It is backed up by a 4 channel SAS RAID controller that makes it equally suitable for control plane applications that require disk I/O with RAID and failover support. The mid-size AMC bay supports more than just mass storage AMCs. With support for PCIe x4 gen 2 as well as base fabric channels and telco clock interfaces, it opens up possibilities for high speed I/O interface integration, telco backhaul interface modules and co-processing engines. In addition to utilizing the chipset’s RASUM features, redundant BIOS flashes and onboard USB disks, enhancements to BIOS and firmware to support CMOS backup, and override and HPM.1 upgradeability, make the MIC-5320 a true carrier grade solution. MIC-5320’s overall design and built-in flexibility using FPGA technology, and RTM customization further enlarge the application fields of this product and reduce time-to- market. Advantech’s world class customization services are ready to tune the MIC-5320 to meet customer-specific requirements. Intel 1GbE/10GbE base and fabric interfaces Six DDR3 VLP DIMMs 4 channel PCIe SAS controller ZD Connectors to RTM Mid-size AMC slot User/Status Three 10/100/1000BASE-T ports Two USB RS-232 LEDs ports console port miniUSB console port MIC-5320 Specifications CPU E5540 (4C/8T) (not NEBS compliant) or L5518 (4C/8T) or L5508 (2C/4T) Intel Nehalem processor Max. Speed 2.53 GHz Processor System Chipset Intel IOH36D / ICH10R BIOS Dual 16-Mbit BIOS firmware flashes with AMI embedded BIOS Bus QPI 5.86 GT/s Technology Triple channel DDR3 1066 MHz SDRAM (72-bit ECC Un-/ Registered) Memory Max. Capacity Configurable up to 48 GB Socket 6 VLP DIMMs Fabric interface i82599 Dual 10GE MAC/PHY supporting two 10Base KX4 ports (XAUI) Zone 2 Base interface i82576 PCIe dual GbE MAC/PHY supporting two 10/100/1000 Mbps ports Serial (COM) 2 x86 Serial Ports (1 RJ-45 connector, 1 miniUSB connector) Front I/O Interface Ethernet 2 10/100/1000BASE-T through PCIe based i82576 MAC/PHY, 1 10/100/1000 Mbps Chipset LAN USB 2.0 2 Type A ports Operating System Compatibility WindRiver PNELE2.0, Linux, PNELE3.0 in preparation BMC Controller Renesas H8S/2166 ® IPMC IPMI Compliant with IPMI 1.5 using Pigeon Point System (PPS) Solution Hardware Monitor NuvoTon W83795ADG Supervision 1 BMC, 1 x86 BIOS POST, OS Boot, Application Watchdog Timer Interval IPMI compliant Site 1 mid-size AMC bay AMC Interface SAS/SATA, PCI Express x4, RTM, Clock Power budget 30 watts Solid State Disk Two 1GB USB flash disks onboard LED Indicators 16 Miscellaneous Storage LSI 1064E onboard SAS controller with four ports up to 3 Gb/s Real Time Clock Built-in RTM Fully managed and hot swappable Zone 3 (RTM) Interface 4x SAS, 2x PCIe x1, PCIe x4, 2x SGMII, 3x USB, 2x UART, 2x SATA, SGPIO, AMC ports 14, 17..20 Dimensions (W x D) 6HP, 294.56 x 322.25 mm (11.60" x 12.69") Physical Characteristics Weight 2.675kg Operating Non-operating Temperature 0 ~ 55° C (32 ~ 131° F) - 40 ~ 70° C (-40 ~ 158° F) Environment Humidity 5 to 93%@40°C (non condensing) 95% @ 40° C (non-condensing) Shock 5 G each axis 2.16 Grms, 30 mins each axis Vibration (5 ~ 500 Hz) 1.5 Grms 2 G ETSI EN300019-2-1 Class1.2, EN300019-2-2 Class 2.3, ETSI EN300019-2-3 Class 3.1E Environment Designed to meet GR63-CORE PICMG 3.0 R3.0, 3.1 R1.0, AMC.0 R2.0, AMC.1 R2.0, AMC.2, AMC.3, HPM.1 Compliance CE mark (EN60950-2001), UL60950-1/CSAC22.2 Safety & EMC FCC47 CFR Part15, Class A, CE Mark (EN55022/EN55024/EN300386) Designed to meet GR1089-CORE Ordering Information Related Products Model number Configuration Model number Configuration MIC-5320A0-S1E 10GbE Ethernet fabric interface, 2C/4T CPU MIC-5401 SAS HDD Carrier AMC MIC-5320A1-S1E 10GbE Ethernet fabric interface, 4C/8T CPU L5518 RTM-5101 RTM Module for MIC-5320 MIC-5320A2-S1E 10GbE Ethernet fabric interface, 4C/8T CPU E5540 Online Download www.advantech.com/products
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the MIC-5320?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods