® CompactPCI Intelligent Chassis ® MIC-3927 Management Module (PICMG 2.9) Features  Compatible with PICMG 2.1, 2.16, and 2.9-compliant components  Monitors via the Intelligent Platform Management Bus (IPMB) protocol  Provides isolated IPMI signals for each slot for maximum security and reliability  Out-of band management interface  Hot swap support for IPMI based field replaceable components  Alarm cut off push button on the front panel  Standalone system monitoring: no driver needed, independent OS RoHS COMPLIANT 2002/95/EC Introduction The MIC-3927 is a proprietary form factor Chassis Management Module (CMM) intended for use with PICMG* 2.1, 2.16, and 2.9-compliant systems (the CompactPCI* Hot Swap, Packet Switching Backplane, and System Management specifications respectively). The MIC-3927 plugs into a dedicated slot in compatible systems. It provides centralized management and alarm notification for system power supplies and fans as well as single board operation status. The CMM may be paired with a backup for high-availability applications. The MIC-3927 is essentially a special-purpose single board computer with a CPU, some memory, a PCI bus, an operating system and peripherals. The MIC-3927 monitors and configures IPMI-based components in the chassis. When the thresholds for temperature and voltage limitations are reached or when failure occurs, the CMM will capture an event. At the same time, the MIC-3927 sends SNMP traps and drives the Telco alarm relays that trigger onboard LEDs. The CMM can query FRU information (such as serial number, model number, manufacture date, etc.), detect presence of components (such as fan tray, CPU board, etc.), and monitor the status of each component. The MIC-3927 also has a built-in Web-based administration interface that allows users to monitor the system’s operation from any place with Internet connectivity. The MIC-3927 adds another dimension to the reliability of your most critical applications. *IPMI function only supported for MIC-3390 and MIC-3392 Sensor Specifications Voltage Input +3.3 V , +5 V , -5 V , +5 V , +12 V , -12 V VBat DC DC DC SB DC DC, Input 1 (onboard) Sensor Thermistor Temperature Interface I2C Range -40 ~ 120° C (-40 ~ 248° F) Input 9 Fan Speed Range 700 ~ 10000 rpm Input 4 Power Good Range High > 2.4 V , Low < 0.8 V DC DC Interface I2C CPU Board Health Input CPU Vcore, CPU fan, CPU temperature (up to 2 CPUs), DC +5 V, DC -5 V, V (I/O), DC +12 V, DC -12 V Max. SBC Monitoring 8 boards Input 4 Digital Input/Output (optional) Output 4 MIC-3927 Hardware Specifications CPU RDC2880 Processor System Firmware 2 MB Embedded Flash ROM Memory 2 MB SRAM Ethernet Interface 10/100Base-T Interface RS-232 Serial Port Baud Rate 9600 bps Buzzer support Yes Miscellaneous Time-out Signal for watchdog Yes timer detection Charge Time 24 hr Battery Type Ni-MH Battery Capacity 1500 mA-H (full charged, for 15~20 minutes operation, depending on the system configuration) Battery Life 80% capacity @ 20° C after 1000 cycles of charge and discharge Power Requirement Typical 5 V @ 550 mA Operating Non-Operating Environment Temperature 0 ~ 60° C (-32 ~ 140° F) -20 ~ 70° C (-4 ~ 158° F) Humidity - 5 ~ 95 % RH, non-condensing Kernel module: 40.5 x 93 mm (1.6" x 3.7") Physical Characteristics Dimensions (W x D) Carrier module: 100 x 95 mm (3.9" x 3.7") Ordering Information Part Number Description MIC-3927AE MIC-3927 alarm module for MIC-3056, MIC-3081 MIC-3927BE MIC-3927 alarm module for MIC-3038, MIC-3041 MIC-3927CE MIC-3927 alarm module for MIC-3042, MIC-3043 Firmware Specifications Real-time system status monitoring: provides real-time status display in HTTP/Java graphical format System Status Monitoring and Monitor the temperature, fan speed and system voltage Management Alarm event record display E-mail: can setup up to 4 addresses to receive notification e-mails Alarm Notification Audible alarm sound SMS support for receiving short message through mobile phone Supported Protocol TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP, Telnet Web-based remote configuration, control and monitor Remote power up and power down Management Function Firmware upgrade from serial port and Ethernet port Supports Time Sync with system board The SSL and SSH secure communications across Internet RS-232 COM port LAN port Onboard Battery Online Download www.advantech.com/products