ADVANTECH MIC-3920
Specifications
Accuracy
±3 °C
Baud Rate
1200, 2400, 4800, 9600, 19200 bps
Board ID
1 ~ 255 (0 for configuration only)
Humidity (Non-Operating)
- 5~95 % RH, non-condensing
Interface
RS-232/RS-485 (jumper selectable)
MTBF
100,000 hours
MTTR
5 minutes
Temperature (Operating )
0 ~ 50 °C (32 ~ 122 °F)
Temperature (Operating)
-20 ~ 70 °C (-4 ~ 158 °F)
Vibration (5-500 Hz)
1.0 Grms 2.0 G
Features
- Audible alarm with three sound effects
- Built-in watchdog timer for self-detection
- Four fan sense inputs for fan speed monitoring
- Monitoring: +3.3 VDC, +5 VDC, +12 VDC, -12 VDC system bus voltages
- On-board battery backup
- One "power good" signal input for power supply monitoring
- One serial port can be set as RS-232 or RS-485 port, supporting modem output
- Three channels of relay outputs for external alarm connection
- Three configurable alarm levels: critical, major, minor
- Three temperature sensor inputs
Datasheet
Advantech-MIC-3920-Datasheet-550065901.pdf
582 KiB
Extracted Text
Intelligent Monitoring MIC-3920/3921 and Alarm Module F e a t u r e s Monitoring: +3.3 VDC, +5 VDC, +12 VDC, -12 VDC system bus voltages Four fan sense inputs for fan speed monitoring Three temperature sensor inputs One "power good" signal input for power supply monitoring Three channels of relay outputs for external alarm connection One serial port can be set as RS-232 or RS-485 port, supporting modem output Three configurable alarm levels: critical, major, minor Audible alarm with three sound effects On-board battery backup Built-in watchdog timer for self-detection Introduction The MIC-3920/MIC-3921 is an intelligent PC-system monitoring module. High Reliability It can detect abnormal system conditions and generate alarm outputs, To ensure operational reliability, the MIC-3920/MIC-3921 features a built- allowing users to take action before system failure. With the in watchdog timer for self-testing. The on-board backup battery enables MIC-3920/MIC-3921, the MIC-3031, MIC-3032, MIC-3033, and MIC- non-stop operation even in the event of total system power failure. 3081A systems are changed into intelligent, self-diagnostic systems, increasing the reliability of critical applications, such as in communications Remote Monitoring or computer telephony. The alarm module comes in two versions: the The MIC-3920/3921 serial port can be configured either as RS-485 to MIC-3920 and the MIC-3921. The MIC-3920, using front panel LEDs for communicate over distances up to 4000 feet, or as RS-232 to connect to status display, is a 3U high, 2-slot (8TE) wide module which can be inserted other devices such as a modem. Users can remotely monitor a number into the MIC-3033. The MIC-3921, equipped with a of computers through a host computer's serial port. high-brightness vacuum fluorescent display and a control keypad, can be inserted into the MIC-3031, 3032, and 3081A. Software Support Powerful Functions The MIC-3920/MIC-3921 is shipped with a powerful and easy-to-use software utility to minimize the time for system integration. "PC Sentry" The MIC-3920/MIC-3921 can detect a wide variety of internal system can run under Windows 95/98/NT. This allows the system host to conditions including temperatures, voltages, fan operation and power communicate with one or more alarm modules via the serial port, for supply status. It can generate several different alarm outputs including configuration, alarm level setting, real-time status display, alarm event acoustic signals and relay outputs to notify nearby users. It can also send logging and so on. messages through the serial port for remote notification. The on-board CPU allows users to set the alarm criteria for each input sensor independently and to program different alarm outputs. All brand names and registered trademarks are the Date of Publication: 2003-07-14 property of their respective owner All specifications are subject to change without notice MIC-3920/3921 Dimension Diagram Dimension Diagram MIC-3920 MIC-3921 CompactPCI Enclosures CompactPCI Boards CompactPCI Peripherals Blade Unit: mm (inch) Unit: mm (inch) Servers Network Specifications Appliances Voltage System Voltage +3.3 V +5 V +12 V -12 V 0 ~ +4.8 V 0 ~ +6.8 V 0 ~ +16.32 V 0 ~ -16.32 V Voltage Accuracy 0.5 % of FSR e-Server Systems Sensor 1 (On Board) 0 ~ 60 °C (32 ~ 140 °F) Temperature Sensor 2 and 3 30 ~ 125 °C (86 ~ 257 °F) Accuracy ±3 °C Storage Sensor 1, 2, and 4 700 ~ 10000 rpm Fan Subsystems Sensor 3 2800 ~ 40000 rpm Hi > 2.4 V Power Good Input Lo < 0.8 V Industrial Output NC (normally closed) and NO (normally open) Computer Relay Chassis Power Rating AC 125 V @ 0.3 A, DC 100 V @ 0.3 A, DC 30 V @ 1 A Interface RS-232/RS-485 (jumper selectable) Serial Port Baud Rate 1200, 2400, 4800, 9600, 19200 bps Full-sized Board ID 1 ~ 255 (0 for configuration only) CPU Cards Charge Time 24 hours Battery Capacity 1200 mA-H (full charged, for 0.5 ~ 1 hr operation) Operating Non-Operating Passive Temperature 0 ~ 50 °C (32 ~ 122 °F) -20 ~ 70 °C (-4 ~ 158 °F) Backplanes Environment Humidity -- 5~95 % RH, non-condensing Vibration (5-500 Hz) 1.0 Grms 2.0 G Industrial Reliability MTBF 100,000 hours Computer Serviceability MTTR 5 minutes Peripherals Ordering Information Part Number Descriptions MIC-3920-A Intelligent system monitoring and alarm module and utility CD MIC-3921-A Intelligent system monitoring and alarm module with vacuum fluorescent display, keypad and utility CD www.advantech.com/nc For More Information
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the MIC-3920?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods