ADVANTECH MIC-3355
Specifications
System Chipset
SiS 5598
Form Factor
PICMG
CompactPCI
Ethernet Chipset
Realtek RTL8139C
Video Chipset
SiS 5598
2nd level cache
Onboard 512 KB Pipeline Burst SRAM
BIOS
Award 2 MB Flash memory
Bus interface
32-bit, 25 ~ 33 MHz, PICMG 2.0 compliant
Chipset
SiS 5598
Ethernet
RTL8139A controller, 10/100Base-TX with RJ-45 connector
Front Panel Connectors
1 VGA, 2 COM, 1 Printer Port, keyboard + mouse, 2 USB, 1 IrDA, 1 • Max. power requirements: +5 V (4.75 ~ 5.25 V) @ 5.5 A
Front side bus clock
66 MHz
Humidity (operating and storage)
5 ~ 95% (non-condensing)
Operating temperature
0 ~ 60° C (32 ~ 140° F)
Parallel port
Configured to LPT1, LPT2, LPT3, or disabled. Supports multimode parallel (SPP/EPP/ECP) port
Processor
Intel Pentium
Intel Pentium MMX
Serial ports
One RS-232, one RS-232/422/485, and two USB ports
Shock
20 G (operating); 50 G (storage/transit)
Size
233.35 x 160 mm (6U), 2-slot (8 TE) width
Storage temperature
-20° C ~ 70° C (-4° F ~ 158° F)
Weight
0.65 kg (1.4 lb)
Features
- 2 DIMM sockets support up to 256 MB SDRAM
- Connection to four Ultra DMA/33 high-speed IDE devices via J3 connector
- Drives seven PCI peripherals with maximum six bus masters
- Onboard 10/100Base-TX Fast Ethernet with RJ-45 connector
- Onboard fast IrDA
- Onboard high-performance VGA supports resolutions up to 1600 x 1200
- Supports almost all Socket 7 processors
- Supports IDE Flash Disk (PCD-1230A)
Datasheet
Extracted Text
® 6U CompactPCI Pentium MMX SBC with VGA & LAN MIC-3355 Features w Supports almost all Socket 7 processors w 2 DIMM sockets support up to 256 MB SDRAM w Onboard 10/100Base-TX Fast Ethernet with RJ-45 connector w Onboard high-performance VGA supports resolutions up to 1600 x 1200 w Connection to four Ultra DMA/33 high-speed IDE devices via J3 connector w Supports IDE Flash Disk (PCD-1230A) w Drives seven PCI peripherals with maximum six bus masters w Onboard fast IrDA Introduction Connectors are firmly screwed to the front panel, and the replaceable The MIC-3355 is a 6U CompactPCI single board computer. It has all shielding gasket is attached to the panel edge. This reduces the functions of an industrial computer on a single board with the emissions and gives better protection against external interference. rugged Eurocard form factor. The MIC-3355 accepts a variety of CPUs and standard SDRAM, providing users with a cost-effective and flexible system. Complete SBC Functions The MIC-3355 offers all the functions of an industrial computer, including onboard high-performance VGA, one Fast Ethernet interface, two serial ports, two USB ports, one parallel port, one PS/2 keyboard connector and one PS/2 mouse connector. The front panel has all the I/O connectors and the reset button, as well as Ethernet, HDD, and power status LEDs. The built-in high-speed PCI IDE controller provides two separate IDE channels with PIO mode 4 and Ultra DMA/33 mode. Users can connect up to four IDE devices and two FDDs to the backplane via the user-defined J3 connector on the MIC-3355. The primary IDE channel is also available via an onboard connector. A pair of mounting brackets for installing a 2.5” HDD are mounted on the MIC-3355. Meets Industrial Application Requirements The MIC-3355 is designed for use in mission-critical applications. It ® accepts DiskOnChip 2000 single chip Flash disks for diskless operation. It also features power management to minimize power consumption. A watchdog timer can automatically reset the system or generate an interrupt if the system stops due to a software bug or EMI. The two-layer front panel design complies with IEEE 1101.10. The MIC-3355 accepts a 2.5” HDD MIC-3355 • FCC Class A; CE Mark to CISPR 11 Class A Specifications J3 Connector J3 Connector J3 Connecto J3 Connector J3 Connector r Pin Definitions Standard SBC Functions ® ® • CPU: Intel Pentium MMX up to 233 MHz, NS 6x86MX, Winchip, AMD K5, K6, up to 333 MHz A B C D E • BIOS: Award 2 MB Flash memory 19 IDE2D3 IDE2D6 IDE2D2 IDE2D10 IDE2D14 • Chipset: SiS 5598 18 IDE2D8 IDE2D5 IDE2D1 IDE2D11 IDE2D15 • Front side bus clock: 66 MHz 17 IDE2D9 IDE2D4 IDE2D0 IDE2D12 IDE2D13 16 • Bus interface: 32-bit, 25 ~ 33 MHz, PICMG 2.0 compliant IDE2D7 IDE2CS0- IDE2IOR- IDE2CS1- IDE2RDY 15 IDE2DRQ IDE2ACK- IDE2SA2 IDE2IRQ IDE2IOW- • 2nd level cache: Onboard 512 KB Pipeline Burst SRAM 14 GND GND IDE2SA1 GND IDE2SA0 • RAM: Two 168-pin DIMM sockets support up to 256 MB 13 GND GND GND GND GND SDRAM 12 IDE1D0 IDE1D2 IDE1D4 IDE1D7 GND • Enhanced IDE interface: Handles up to 4 IDE large HDDs or 11 IDE1D1 IDE1D3 IDE1D8 IDE1D6 IDE1D12 other IDE devices via J3 connector. Supports PIO mode 4 10 IDE1D5 IDE1D9 IDE1D10 IDE1D11 IDE1D13 and DMA/33 mode. A primary IDE device is available on-board 9 IDE1D15 IDE1D14 IDE1DRQ- IDE1CS1- IDE1IOR- • Floppy disk drive interface: Supports up to two floppy disk 8 IRQ14 IDE1ACK- N/C IDE1SA2 IDE1IOW- drives. Available via J3 connector 7 IDE1LED GND IDE1RST- IDE1RDY IDE1CS0- • Parallel port: Configured to LPT1, LPT2, LPT3, or disabled. 6 GND GND GND IDE1SA0 IDE1SA1 Supports multimode parallel (SPP/EPP/ECP) port 5 GND GPIO5 IOCHK- SDCLK1 SDDAT1 • Ethernet: RTL8139A controller, 10/100Base-TX with RJ-45 4 N/C GND N/C GND GND connector 3 DSKCHG- MOTEA- STEP- SIDE1- RDATA- • Serial ports: One RS-232, one RS-232/422/485, and two USB 2 DRVA- MOTEB- DVSL- WPT- TK00 ports 1 INDEX- DRVB- FDIR- WGATE- WDATA • Watchdog timer: Can generate a system reset, or IRQ 15. Software enabled/disabled. Time interval from 1 to 63 seconds. Jumperless with run-time setup Ordering Information • Keyboard & mouse connectors: Supports PS/2 keyboard and PS/2 mouse ® q q q q q MIC-3355: CompactPCI Pentium -based ISBC with VGA/LAN, • Infrared port: Fast IrDA. Transfer rates up to 4 Mbps. I/O port utility CD-ROM disc, manual, flat cable, and HDD mounting programmable to COM1 (3F8), COM2 (2F8), COM3 (3E8), or brackets COM4 (2E8) q q q q q PCD-1230A: IDE Flash disk module (4/8/16 MB options) • PCI-to-PCI bridge: Texas Instruments PCI2031, drives seven peripherals with maximum six secondary bus masters PCI SVGA Interface • Display memory: 0.5 to 4 MB shared system SDRAM, user-defined • Display resolution: Supports non-interlaced CRT monitor resolutions up to 1600 x 1200 @ 256 colors, 16 million colors up to 1024 x 768 Mechanical and Environmental Specifications • Max. power requirements: +5 V (4.75 ~ 5.25 V) @ 5.5 A • Operating temperature: 0 ~ 60° C (32 ~ 140° F) • Storage temperature: -20° C ~ 70° C (-4° F ~ 158° F) • Humidity (operating and storage): 5 ~ 95% (non-condensing) • Size: 233.35 x 160 mm (6U), 2-slot (8 TE) width • Weight: 0.65 kg (1.4 lb) • Shock: 20 G (operating); 50 G (storage/transit) 2010335500 Note: All specifications are subject to change without notice
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the MIC-3355?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Advantech 1906618403 CPU Board. VGA/LAN/HISA-(FSB 533) rev A2 Processor System CPU Intel Pentium 4, ...

Advantech 1906618608 CPU Boards. Socket 478 | Pentium 4/Celeron Processor | VGA/Dual Gigabit LAN | H...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods