ADVANTECH MIC-3351
Specifications
Form Factor
PICMG
2nd Level Cache
512 KB on-board
BIOS
Award 2 Mb Flash memory
Bus Interface
32-bit, 33 MHz, PICMG 2.0 compliant
Chipset
Intel 430 TX
CompactFlash Interface
Accepts one CompactFlash card on primary IDE channel, master/slave jumper selectable
CPU
On-board Intel Pentium MMX 266 MHz
Enhanced IDE Interface
Handles up to 2 IDE devices. Supports PIO mode 4 and DMA/33 mode
Ethernet
Intel 82559 Fast Ethernet controller chips, 10/100Base-TX with RJ-45 connectors
FDD Interface
Supports up to two floppy disk drives
Front Side Bus Clock
66 MHz
Keyboard/mouse Connectors
One 6-pin mini-DIN connector on the front panel
Parallel Port
Supports multimode parallel (SPP/EPP/ECP) port
PCI-to-PCI Bridge
One Intel DEC 21150 controller chip, drives up to 7 bus master peripherals
RAM
Two 144-pin SODIMM sockets support up to 256 MB SDRAM
Serial Ports
Two RS-232 ports with 16550 UARTs
USB Interface
Two USB ports
Watchdog Timer
Can generate a system reset or IRQ 15. Software enabled/disabled. Time interval is from 1 to 63 seconds. Jumperless with run-time setup
Features
- Accepts CompactFlash memory card
- Compact 2-slot width
- On-board 10/100Base-TX fast Ethernet with RJ-45 connector
- On-board high-performance VGA display
- On-board Pentium MMX 266 CPU
- One PCI-to-PCI bridge drives up to 7 bus master peripherals
- Supports 2 Ultra DMA/33 high-speed IDE devices
- Supports on-board HDD, optional 1-slot wide mounting bracket for an onboard FDD
- Two SODIMM sockets support up to 256 MB SDRAM
Datasheet
Extracted Text
® ® 3U CompactPCI Pentium MMX MIC-3351 Controller with VGA/LAN/SCSI 1 IPPC & AWS Features ® § On-board Pentium MMX 266 CPU 2 § Two SODIMM sockets support up to 256 MB SDRAM TPC § On-board high-performance VGA display § On-board 10/100Base-TX fast Ethernet with 3 RJ-45 connector FPM § Supports 2 Ultra DMA/33 high-speed IDE devices § Accepts CompactFlash memory card 4 § One PCI-to-PCI bridge drives up to 7 bus master peripherals ATM § Compact 2-slot width § Supports on-board HDD, optional 1-slot wide mounting bracket for an on- 5 board FDD DA&C 6 cPCI 7 Introduction ADAM-3000 ® ® The MIC-3351 is a 3U CompactPCI controller with an onboard Intel Pentium MMX 266 MHz CPU, and can operate over a wide temperature range. The MIC-3351 also has many functions within its mere 2-slot width, thus saving valuable CompactPCI slots for peripheral cards. 8 ® eConnectivity Low Power Consumption Mobile Pentium Processor The MIC-3351 uses an embedded Intel Pentium MMX 266 MHz processor which has low power consumption and an extended temperature range. This CPU is designed for embedded applications and is suitable for fanless operation. 9 ICOM Ethernet and PCI-to-PCI Bridge The MIC-3351 has an onboard high-performance fast Ethernet interface which complies with IEEE 802.3/802.3u for 10Base-T and 100 Base-TX data rate. The MIC-3351 also provides 10 a PCI-to-PCI bridge to drive up to 7 PCI master devices. Software PCI SVGA Interface Specifications ® § Controller Intel C&T 69000 11 UNO-2000/3000 Standard Controller Functions § Display Memory Built-in 2 MB SDRAM display cache ® § CPU On-board Intel Pentium MMX 266 MHz § Display Resolution Supports non-interlaced CRT monitor resolutions up to ® 1024 x 768 x 16-bit colors § BIOS Award 2 Mb Flash memory 12 VBOX § Chipset Intel 430 TX Mechanical and Environmental Specifications § Front Side Bus Clock 66 MHz § Operating Temperature 0 ~ 70° C (32 ~ 158° F) § Bus Interface 32-bit, 33 MHz, PICMG 2.0 compliant 13 § Storage Temperature -20 ~ 80° C (-4 ~ 176° F) nd ADAM-4000 § 2 Level Cache 512 KB on-board § Humidity 5 ~ 95% non-condensing (operating and storage) § RAM Two 144-pin SODIMM sockets support up to 256 MB § Size 100 x 160 mm (3U), 2-slot (8 TE) or 3-slot (12 TE) SDRAM width 14 § Enhanced IDE Interface Handles up to 2 IDE devices. Supports PIO mode 4 and ADAM-5000 § Weight 0.8 kg (1.8 lb) DMA/33 mode § Shock 20 G (operating); 50 G (storage/transit) § Parallel Port Supports multimode parallel (SPP/EPP/ECP) port § Random Vibration 1.5 Grms 15 § Ethernet Intel 82559 Fast Ethernet controller chips, 10/ ADAM-6000 100Base-TX with RJ-45 connectors Ordering Information § FDD Interface Supports up to two floppy disk drives 16 § Serial Ports Two RS-232 ports with 16550 UARTs § MIC-3351 3U CompactPCI Pentium MMX Controller with ADAM-8000 § USB Interface Two USB ports VGA/LAN, parallel port, mounting bracket for FDD, utility CD-ROM disc, and manual § CompactFlash Interface Accepts one CompactFlash card on primary IDE channel, master/slave jumper selectable § Keyboard/ One 6-pin mini-DIN connector on the front panel mouse Connectors § Watchdog Timer Can generate a system reset or IRQ 15. Software enabled/disabled. Time interval is from 1 to 63 seconds. Jumperless with run-time setup § PCI-to-PCI Bridge One Intel DEC 21150 controller chip, drives up to 7 bus master peripherals CompactPCI Systems Online Download www.advantech.com/products 6-6 6-7 MIC-3351 1 IPPC & AWS Features Installations 2 TPC HDD Installation 3 FPM 4 ATM 5 DA&C FDD Installation 6 cPCI RAM Module Installation 7 ADAM-3000 8 eConnectivity Complete Controller Functions 9 The MIC-3351 offers all functions of an industrial computer with the rugged Eurocard 3U ICOM form factor. It offers an VGA connector, two serial ports, two USB ports, one parallel port or one optional SCSI interface, one PS/2 keyboard/mouse connector and one Ethernet 10 interface. Standard I/O connectors for all the functions are available on the front panel. Also Software located on the front panel are the LEDs for power status, HDD operation, SCSI operation, Ethernet communication, and one reset button. The built-in high speed PCI IDE controller provides one IDE channel with Ultra DMA/33 11 UNO-2000/3000 modes. A 2.5" hard disk drive can be mounted on the MIC-3351’s two-slot wide space. An optional 1-slot wide mounting bracket is available for an onboard compact floppy disk drive. 12 VBOX Meets Industrial Applications Requirements The MIC-3351 is designed for use in mission critical applications. It accepts a 13 CompactFlash memory card to eliminate the need to use a fragile rotating hard drive. A ADAM-4000 watchdog timer can automatically reset the system or generate an interrupt if the system stops due to a program bug or EMI. The two-layer front panel design complies with IEEE The 2-slot wide and 3-slot wide MIC-3351 1101.10. Connectors are firmly screwed to the front panel, and the replaceable shielding 14 gasket is attached to the panel edge. This reduces emissions and gives better protection ADAM-5000 against external interference. 15 ADAM-6000 16 ADAM-8000 CompactPCI Systems Online Download www.advantech.com/products 6-6 6-7
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the MIC-3351?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Advantech 1906618403 CPU Board. VGA/LAN/HISA-(FSB 533) rev A2 Processor System CPU Intel Pentium 4, ...

Advantech 1906618608 CPU Boards. Socket 478 | Pentium 4/Celeron Processor | VGA/Dual Gigabit LAN | H...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods