ADVANTECH MIC-3350
Specifications
Form Factor
PICMG
System Chipset
SiS 5598
Video Chipset
SiS 5598
2nd level cache
Onboard 512 KB Pipeline Burst SRAM
BIOS
Award 2 MB Flash memory
Bus interface
32-bit, 25 ~ 33 MHz, PICMG 2.0 compliant
Chipset
SiS5598
CPU
Intel Pentium MMX up to 233 MHz, NS 6x86MX, Winchip, AMD K5, K6, up to 333 MHz
Enhanced IDE interface
One onboard IDE channel supports PIO Mode 4and DMA/33 mode
Floppy disk drive interface
Supports one floppy disk drive, 1.44 MB or 2.88 KB
Front side bus clock
66 MHz
Keyboard & mouse connectors
Supports PS/2 keyboard and PS/2 mouse
Parallel port
Configured to LPT1, LPT2, LPT3 or disabled. Supportsmultimode parallel (SPP/EPP/ECP) port
PCI bus
Drives 7 peripherals with max. 4 bus masters
Processor
Intel Pentium MMX
RAM
Two 72-pin SIMM sockets. Supports DRAM with memory capacityfrom 2 to 64 MB
Serial ports
One RS-232, one RS-232/422/485 and 2 USB ports
Watchdog timer
Can generate a system reset or IRQ 15. Software enabled/disabled. Time interval from 1 to 62 seconds. Jumperless with run-time setup
Features
- 2 SIMM sockets support up to 64 MB EDO DRAM
- 2-slot compact width (8TE). 3-slot width (12TE)with bracket for onboard HDDs and FDDs
- Drives seven PCI peripherals with maximum fourbus masters
- Onboard high-pe r formanc e VGA suppor t sresolution up to 1600 x 1200
- Supports almost all socket 7 processorsw
- Supports Ultra DMA/33 high-speed IDE device
Datasheet
Extracted Text
® 3U CompactPCI Pentium MMX SBC with VGA MIC-3350 Features w Supports almost all socket 7 processors w 2 SIMM sockets support up to 64 MB EDO DRAM w Onboard high-performance VGA supports resolution up to 1600 x 1200 w Drives seven PCI peripherals with maximum four bus masters w Supports Ultra DMA/33 high-speed IDE device w 2-slot compact width (8TE). 3-slot width (12TE) with bracket for onboard HDDs and FDDs Introduction watchdog timer can automatically reset the system or generate an The MIC-3350 is a 3U CompactPCI single board computer compliant interrupt if the system stops due to a software bug or EMI. The two- with PICMG CompactPCI Specification 2.0. It offers all the functions layer front panel design is IEEE 1101.10 compliant. Connectors are of an industrial computer on a single board with the rugged firmly screwed to the front panel, and a replaceable shielding gasket Eurocard form factor. The MIC-3350 accepts a variety of CPUs and is attached to the panel edge. This reduces emissions and gives standard EDO DRAM, providing users with a cost-effective and better protection against external interference. flexible system. Compact Modular Design The MIC-3350 crams all the functions of a computer into a 3U high, 2-slot wide single board. A 1-slot wide mounting bracket can be added onto the MIC-3350 for mounting one 2.5" HDD and one slim- type FDD. Although compact in size, the MIC-3350 accepts standard SIMM memory modules instead of expensive proprietary or special memory modules. Complete SBC Functions The MIC-3350 offers all the functions of an industrial computer, including onboard high-performance VGA, two serial ports, two USB ports, one parallel port, and one PS/2 keyboard/mouse connector. The front panel contains all the I/O connectors, the reset button, and the power status LED. The built-in high-speed PCI IDE controller provides one IDE channel with PIO Mode 4 and Ultra DMA/33 mode. Users can connect one 2.5” HDD and one slim-type FDD through the onboard connectors. Meets Industrial Application Requirements The MIC-3350 is designed for use in mission critical applications. It accepts the DOC 2000 single chip Flash disk for diskless operation. It The MIC-3350 accepts an FDD and a 2.5” HDD also features power management to minimize power consumption. A MIC-3350 Installation • Display resolution: Supports non-interlaced CRT monitor Specifications Specifications Specifications Specifications Specifications resolutions up to 1600 x 1200 @ 256 colors, 16 million colors up to 1024 x 768 Standard SBC functions • CPU: Intel® Pentium® MMX up to 233 MHz, NS 6x86MX, Winchip, Mechanical and environmental specifications AMD K5, K6, up to 333 MHz • Max. power requirements: +5 V (4.75 ~ 5.25 V) @ 5.5 A • BIOS: Award 2 MB Flash memory • Operating temperature: 0 ~ 60° C (32 ~140° F) • Chipset: SiS5598 • Storage temperature: -20 ~ 70° C (-40 ~ 165° F) • Front side bus clock: 66 MHz • Humidity (operating and storage): 5 ~ 95% (non-condensing) • Bus interface: 32-bit, 25 ~ 33 MHz, PICMG 2.0 compliant • Size: 100 x 160 mm (6U size), 2-slot width (8TE) • 2nd level cache: Onboard 512 KB Pipeline Burst SRAM * Additional 1-slot wide (4-TE) bracket can be used for mounting • RAM: Two 72-pin SIMM sockets. Supports DRAM with memory capacity one hard disk drive and one floppy disk drive from 2 to 64 MB • Weight: 0.5 kg (1.1 lb) • Enhanced IDE interface: One onboard IDE channel supports PIO Mode 4 • Shock: 20 G (operating); 50 G (storage/transit) and DMA/33 mode • Floppy disk drive interface: Supports one floppy disk drive, 1.44 MB or 2.88 KB Ordering Information • Parallel port: Configured to LPT1, LPT2, LPT3 or disabled. Supports multimode parallel (SPP/EPP/ECP) port ® r r r r r MIC-3350: 3U CompactPCI Pentium -based ISBC with VGA, utility • Serial ports: One RS-232, one RS-232/422/485 and 2 USB ports CD-ROM disc, HDD and FDD mounting bracket, manual • Watchdog timer: Can generate a system reset or IRQ 15. Software enabled/ ® r r r r r PCD-2000: DiskOnChip 2000 single chip Flash disk disabled. Time interval from 1 to 62 seconds. Jumperless with run-time setup • Keyboard & mouse connectors: Supports PS/2 keyboard and PS/2 mouse • PCI bus: Drives 7 peripherals with max. 4 bus masters PCI SVGA Interface • Display memory: 0.5 to 4 MB shared system DRAM, user-defined 2010335000 Note: All specifications are subject to change without notice
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the MIC-3350?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Advantech 1906618403 CPU Board. VGA/LAN/HISA-(FSB 533) rev A2 Processor System CPU Intel Pentium 4, ...

Advantech 1906618608 CPU Boards. Socket 478 | Pentium 4/Celeron Processor | VGA/Dual Gigabit LAN | H...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods