3U CompactPCI® Pentium® M 760 MIC-3321 2.0G High-performance Controller Features NEW  Built-in Intel® Pentium® M 760 2.0G processor with 2MB L2 Cache  Mobile Intel 915GM express chipset  Supports up to 1GB DDR2 533/400 SDRAM soldered on board  Extended operating temp: -25 ~ 70° C (Optional; MIC-3321C/ CS only)  Dual Giga LAN on PCI-Express  High-performance Intel Graphics Media Accelerator 900 VGA display  Onboard CompactFlash® disk socket  Onboard 2.5” HDD support  Rear I/O signal support for easy wiring MIC-3321 MIC-3321LS Introduction The MIC-3321 3U is a CompactPCI system controller board that combines the performance of Intel’s Mobile Pentium M 760 2.0GHz processor with the high integration of the 915GM chipset and the I/O Controller Hub ICH6. The low power of the Intel Mobile Celeron® M makes it possible to work with high extended temperature ranges. The directed soldered CPU and memory provide less weight and a higher shock/vibration resistance than socket devices. MIC-3321 is a powerful 3U CompactPCI Controller that fulfills your requirements in mission critical applications, such as military defense, transportation, traffic control, test and measurement (T&M) as well as critical data acquisition & control applications. Specifications CPU MIC-3321: Intel Pentium M 760 2.0GHz with 2MB L2 cache Serial Interface: RS-232 Controller: 2 x 16C550 Compatible MIC-3321C: Intel Celeron M Ultra Low Voltage 373 1.0GHz with 512 KB L2 cache Data Bits: 5, 6, 7, 8 MIC-3321L: Intel Celeron M 800MHz (no cache) Stop Bits: 1, 1.5, 2 Chipset Intel 915GM (GMCH) + Intel 82801FBM (ICH6-M) Parity: None, Even, Odd BIOS Award 4MB Flash Speed (bps): 50 ~ 115.2K Bus Front Side Bus 533MHz (Intel Pentium M 760 2.0GHz CPU) Data Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND 400MHz (Intel Celeron M Ultra Low Voltage 373 1.0GHz CPU) PCI Bus PCI-to-PCI Bridge: PERICOM PI7C8150 Connector: 2 x DB9 male 7 x 32bit/33MHz CompactPCI bus Master interface One as front I/O, one as rear I/O 3.3V/5V VIO adjustable P-IDE One channel P-IDE Supports PIO mode 4 (16.67MB/s data transfer rate) and ATA Memory Directed Soldered 512MB DDR2 SDRAM (MIC-3321, MIC-3321C) 33/66/100 (33/66/100MB/s data transfer rate) Directed Soldered 256MB DDR2 SDRAM (MIC-3321L) 1 x CompactFlash Socket Type II Graphics Controller: Intel Graphics Media Accelerator 900 1 x 44-pin 2.5” HDD connector VRAM: DVMT3.0 128MB SATA SATA interface with data transfer rate up to 150MB/s Resolution: Up to 2048 x 1536 with 32-bit color at 75Hz 1 x External SATA connector Ethernet Interface: 10/100/1000Base-TX Gigabit Ethernet USB 4 x USB 2.0 channels up to 480Mbps, 2 as front I/O, 2 as rear I/O Controller: 2 x Intel 82573E/L PCI Express Gigabit Ethernet Controller PS/2 PS/2 for keyboard and mouse legacy support Connector: 2 x RJ-45 Watchdog Timer 0 ~ 64s, 0.25s step, generate reset signal Supports Pre-boot Execution Environment (PXE) Hot Swap Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap specification. (PCI to PCI bridge GPIO3) www.advantech.com/products Online Download All product specifications are subject to change without notice Last updated: 18-September-2006 MIC-3321 Front Panel 4HP Board 1 x VGA-CRT 15-pin D-SUB connector Front View of MIC-3321 Functions Ethernet: 1 x RJ-45 connector with integrated LEDs USB: 2 x 4-pin connectors MIC-3321S MIC-3321 MIC-3521 Reset: Reset button, guarded LED: Power, HDD 8HP Board COM1: 1 x DB9 RS-232 connector (Additional to PS/2: 1 x PS/2 connector for keyboard and mouse 4HP) Ethernet: 1 x RJ-45 connector with integrated LEDs Rear I/O via J2 2 x USB 2.0 channels 2 x Gigabit Ethernet channels with LED (shared with front I/O) 1 x COM port (TTL level) 1 x VGA-CRT channel (shared with front I/O) 1 x PS/2 keyboard/mouse channel (shared with front I/O) Compliancy PICMG 2.0 Rev. 3.0 compatible CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Environment Operating 0 ~ 50° C (MIC-3321 Pentium M 2.0G) Temperature 0 ~ 50° C (MIC-3321L Celeron M 800M) 0 ~ 50° C (MIC-3321C Celeron M 1.0G) -25 ~ 70° C (Optional; MIC-3321C/MIC-3321CS only) Storage -40 ~ 80° C Temperature Physical Dimensions 160 x 100 mm (3U) (W x H) Weight 0.6 Kg Rear Transition P/N MIC-3521 Board Width 8HP Ordering Information  MIC-3321-AE: Pentium M 2.0GHz, 2MByte L2 cache, 512MByte soldered DDR2 SDRAM, 8HP width  MIC-3321S-AE: Pentium M 2.0GHz, 2MByte L2 cache, 512MByte soldered DDR2 SDRAM, 4HP width  MIC-3321C-AE: Celeron M 1.0GHz, 512KByte L2 cache, 512MByte soldered DDR2 SDRAM, 8HP width  MIC-3321CS-AE: Celeron M 1.0GHz, 512KByte L2 cache, 512MByte soldered DDR2 SDRAM, 4HP width  MIC-3321L-AE: Celeron M 800MHz, 0KByte L2 cache, 256MByte soldered DDR2 SDRAM, 8HP width  MIC-3321LS-AE: Celeron M 800MHz, 0KByte L2 cache, 256MByte soldered DDR2 SDRAM, 4HP width  MIC-3521-AE: Rear I/O Transition Board for MIC-3321 series CompactPCI Systems