® 4U CompactPCI Enclosure with 5-slot 6U Backplane and Redundant Power Supply MIC-3033 (CT Bus and Rear I/O) F e a t u r e s  5-slot 6U CompactPCI backplane  Supports rear I/O ®  H.110 CT bus compliant (PICMG 2.5)  300 W ATX 1+1 redundant power supply  Hot-swappable cooling fan  Built-in alarm module (MIC-3920)  Optional slim CD-ROM and 3.5" FDD * CompactPCI CPU board is not included. Introduction Specially designed for space-conscious applications, the MIC-3033 CD-ROM drive. Hot-swappable system components, such as fans and power accommodates five CompactPCI slots in a 4U-high enclosure; its ample room supplies, provide built-in redundancy to simplify replacement and minimize service time. Hot-swappable fans located in front provide forced cool air into allows expansion for carrier-grade telecom and Internet applications. It supports PICMG 2.5 compliant H.110 CT bus and IEEE 1101.11 rear I/O the system, meanwhile, the rear side fan propels hot air out of the system, transition cards. Its easily accessable drive bay accommodates up to four both allow users to replace them without interrupting the system operation. devices, including hard disk drives, floppy disk drive and slim-type 300 W ATX 1+1 Hot-swappable fan module One 3.5” FDD Two 3.5” HDDs 5-slot backplane with H.110 CT bus redundant power supply provides outstanding ventilation One slim CD-ROM System fault-detection and alarm notification, MIC-3920, monitoring voltage, temperature, fan operation, and power supply status FCC  All brand names and registered trademarks are the Date of Publication: 2003-07-14 property of their respective owner  All specifications are subject to change without notice MIC-3033 Specifications 6U Slot System x1, Peripheral x4, Rear transition x5 (80 mm, IEEE 1101.11 compatible) Bus 32-bit/33 MHz, 64-bit/66 MHz Backplane H.110 CT Bus Yes V Voltage 3.3 V/5 V (short-bar selectable) I/O Front-accessible Internal CompactPCI Enclosures 3.5" FDD 1 Drive Bay 2 3.5" HDD CompactPCI Slim CD-ROM 1 Boards Cooling Fan 1 (hot-swap, 86 CFM), 1 (hot-swap, 15 CFM) Input AC 90 ~ 264 V @ 47 ~ 63 Hz CompactPCI Peripherals Output 300 W ATX (1+1 redundant, 300 W/each) +3.3 V +5 V -5 V +12 V -12 V +5 Vsb Power Requirement Max. Load 22 A 30 A 1 A 11 A 1 A 1.5 A Blade Servers Min. Load -- 2 A -- 0.5 A -- -- Safety CE, TÜV, UL, CB Network Operating Non-Operating Appliances Temperature 0 ~ 45 °C (32 ~ 113 °F) -40 ~ 60 °C (-40 ~ 140 °F) Environment Humidity -- 95 % @ 60 °C, non-condensing e-Server Systems Vibration (5-500 Hz) 1.0 Grms 2.0 G Dimensions (W x H x D) 440 x 177 x 342 mm (17.3" x 7" x 13.5") Physical Storage Weight 10 Kg (22 lb) Subsystems Reliability MTBF 100,000 hours PICMG 2.0, R2.1 CompactPCI Specification Industrial Compliance Standard PICMG 2.1, R1.0 Hot-Swap Specification Computer PICMG 2.5, R1.0 Computer Telephony Specification Chassis Full-sized CPU Cards Recommended Configurations Ordering Information CPU Board HDD Alarm Module/Chassis Alarm Module Part Number Power Supply Enclosure Rear I/O Board Drive Bay Management Module and CMM Master Passive 300 W ATX MIC-3389 RIO-3301, RIO-3302 Backplanes MIC-3033/5-4R 2 (1+1 redundant, MIC-3920 MIC-3377/M RIO-3302S 300 W/redundant) MIC-3357 MIC-3033/5-4R MIC-3920 MIC-3365 RIO-3301, MIC-3302 Industrial MIC-3365F MIC-3302F Parts Information Computer Peripherals Part Number Descriptions MIC-3920-A Intelligent monitoring and alarm module with utility CD Front fan tray module including metal bracket, 9662303301 86-CFM fan x1, fan filter, foam and connector Rear fan tray module including metal bracket, 9662303302 15-CFM fan x1, fan filter, foam and connector 968A303300 Single power supply module for redundant power supply www.advantech.com/nc For More Information