6" 1/4 VGA RGB Color On-Board I/O Functions Graphic LCD Display With Digital Inputs (8) Digital Outputs (8) Touch Screen Analog Inputs (6) Serial Ports (3) User CPU I/O Bus Printer Port (1) For Adding Custom Interfaces Easy Mechanical Design-In On-Board Power Supply Accepts 6 to 12 Vdc AMD Elan-SC400 100 Mhz (486) Embedded PCMCIA Card Slot Accepts Single Board Computer Ethernet, Modem, Or ATA FLASH CE-SBC-SC400 CE-SBC-SC400 New from R.L.C., the CE-SBC-SC400 32-Bit Embedded Single Board Computer features a complete Windows CE system that can easily run your applications written in Microsoft Embedded Visual C++, or Visual Basic. Key hardware features include an AMD ELAN SC400 486 compatible CPU/Controller, RAM and FLASH Memory, Solid State Disk, Real Time Clock, Serial Ports (3), Parallel Printer Port, LCD Color Graphics LCD, Touch Screen, PCMCIA Card Interface, Digital Parallel TTL I/O (16), Analog Inputs (6), and much more. The CE-SBC-SC400 comes complete with a 1/4 VGA color graphics LCD display with touch screen. Software development using Microsoft embedded visual tools include remote debug and drag & drop features between your software development computer and the CE-SBC-SC400. Both Ethernet and serial port software development is supported. Hardware Features Software Features * 32-Bit ELAN SC400 (486) Embedded CPU * Windows CE (3.0 Standard) * 100 MHz Clock Speed * Visual Basic Supported * 12 Meg-bytes On-Board FLASH Standard * Visual C++ Supported * 16 Mega-bytes On-Board RAM Standard * Remote Debug Supported * LCD Color Graphics Display (6", 1/4 VGA) * On-Board FLASH Programming * Touch Screen Standard * Demo Programs Provided Free * PCMCIA Card Interface * Serial COM Ports (3) * Printer Port (1) TOLL FREE TOLL FREE * Analog Inputs (6) 1-888-RLC-TECH 1-888-RLC-TECH * Digital Parallel TTL I/O (16) * Real Time Clock And Timers (3) http://www.RLC.com http://www.RLC.com * User I/O Expansion Bus * On-Board Power Supply Microsoft and Windows CE is a trademark of Microsoft Corp. R.L.C. Enterprises, Inc. 2985 Theatre Drive, Paso Robles, CA 93446 Phone (805) 239-9737 FAX (805) 239-9736 Copyright 2002, R.L.C. Enterprises, Inc. All Rights Reserved. Specifications may change without notice. Version 3.0 CE-SBC-SC400 CE-SBC-SC400 Top View 6" 1/4 VGA (320x240) Color RGB Graphics LCD Display With Touch Screen Standard Software Controlled Contrast & Back Light Side View Low Profile Easy To Mount Mechanical Design PCMCIA Card Socket Adapter Bottom Snaps Directly To Back V iew Of Main CPU Board Easy Connection To On-Board User I/O Expansion Functions On-Board I/O & Expansion Connectors Serial Serial Serial Printer A to D TTL I/O Color LCD PCMCIA User I/O Port Port Port Port 8-Ch. 8 Input Graphics Controller Bus (COM-1) (COM-2) (COM-3) (LPT-1) 12-Bit 8 Output Display & Touch Interface Expansion RS-232 232/422/485 RS-232 Reset Button Max-704 Boot RTC Software Power FLASH Lithium Dip Switches Supervisory 16 Battery (5) Circuit Mega-Bytes Built-In DRAM BIOS 4 Mega-Bytes Standard Standard AMD ELAN SC-400 (486) 100 MHz 32-Bit Embedded CPU Disk-On-A Real Time Clock, (3) Timers, DRAM Controller, Chip Interrupt Controller, Chip Select Controller, LCD Flash Disk Graphics Controller, Power Management Unit, 8 Mega-Bytes PCMCIA Controller, COM Port, Printer Port, & Standard More. Expandable CE-SBC-SC400 Hardware Description AMD ELAN-SC400 CPU Color Display & Touch Screen The CE-SBC-SC400 features the AMD ELAN SC400 The CE-SBC-SC400 features a built-in color LCD microcontroller/CPU which combines a 100 Mhz 32-bit, low- graphics display with integrated resistive touch screen. The voltage 486 CPU with a complete set of PC/AT compatible display is mounted directly to the main CPU board and peripherals, along with the power management features required features 1/4 VGA resolution, 320 x 240 RGB color 4 bits per for low power and battery operation. Fully integrated compatible pixel. Display and touch screen drivers have been custom peripherals include an LCD character/graphics controller, integrated into the Windows CE operating system.The display PCMCIA controller interface, two 8259A compatible features a wide viewing angle with CCFL back light. Power programmable interrupt controllers (PICs), DRAM controller, for the LCD display is generated on-board. Software controls two 8237A compatible DMA controllers, 8254 compatible timer, allow for contrast adjustment and applications to turn off the 16550 UART, real-time clock (RTC), and an enhanced parallel CCFL back light to conserve power. printer port. The ELAN SC400 microcontroller/CPU is targeted Standard I/O Interfaces specifically for embedded systems. All software written for the The CE-SBC-SC400 provides (3) serial ports, (1) x86 architecture family is compatible with the ELAN SC400 microcontroller/CPU. standard parallel printer port, (8) Digital TTL outputs, (8) Digital TTL inputs, and (6) channels of 12-Bit A to D conversion. These standard I/O features are made available On-Board Memory on standard connectors on the back side of the main CPU board. Software drivers and demonstration programs are The CE-SBC-SC400 provides 16 Mega-bytes of DRAM provided for each of these I/O functions. and 12 Mega-bytes of on-board FLASH memory as standard. Additional FLASH memory may also be added using ATA PCMCIA Socket Adapter FLASH memory cards via the PCMCIA card interface. A BIOS The PCMCIA card host adapter interface conforms to with built-in loader and FLASH programmer is contained in a PCMCIA Standard Release 2.1. The interface provides protected region of the on-board BOOT FLASH memory. The support for one external PCMCIA card socket. The PCMCIA BIOS allows new versions of the operating system to be down- socket adapter mounts directly on the back side of the main loaded and programmed directly into the BOOT FLASH CPU board. Standard size or compact PCMCIA cards are memory without the use of external EPROM programmers. Full accepted. program transfers into FLASH DISK memory space using standard drag & drop and your Windows Explorer is supported. User I/O Expansion BUS The CE-SBC-SC400 provides an interface connector to provide the engineer with access to the CPU address lines, Serial Ports (3) data lines, chip selects, interrupts, and control signals. You The CE-SBC-SC400 provides three (3) standard serial can use this interface to add your own custom I/O designs. ports (COM-1, COM-2, COM-3). Each of the three serial ports Software drivers are provided. provide RS-232 receivers and drivers for Tx, Rx, RTS, and CTS More Features RS-232 signals. Standard DB-9 connectors are provided. The Additional standard functions and features include a bat- COM-2 port also provides RS-422/485 drivers for interfacing to tery backed Real Time Clock, software dip switch, precision Network I/O modules and other similar devices that use this reset circuit, on-board regulated power supply, two 8259 type interface. This RS-422/485 network interface is provided compatible interrupt controllers, 8254 timers and more. on an RJ-11 style connector. Software Development development and debug is supported using the serial COM-1 port Windows CE is a low-cost, compact real time or a PCMCIA card Ethernet connection. Full remote debug, and embedded operating system from Microsoft designed for program transfers into FLASH DISK memory using standard sophisticated 32-bit embedded computer solutions. Windows CE drag & drop and your Windows Explorer are supported. features a compact operating system which has been custom tailored and ported to the CE-SBC-SC400 Embedded Single Board Computer. Many of the interfaces provided by the CE- CE-SBC-SC400 SBC-SC400 have been integrated into the operating system. You can write your application programs using Microsoft embedded Development System Visual Basic or Visual C++ and debug your application using the full featured remote debugger. You can add custom drivers and DLLs as required for your specific hardware application. RS-232 Microsoft embedded Visual Basic or Visual C++ is used for software application development. R.L.C. will provide the Ethernet PC/XT/AT Windows CE operating system custom tailored and pre-installed in the CE-SBC-SC400 along with everything needed to start Windows 98 developing your custom software applications. Remote application Visual Basic or Visual C++ Or Above 0.2” Typical CE-SBC-SC400 Mechanical Specifications 7.5” 0.2” Typical Top View Reset Button 1/4 VGA RGB Color Graphic LCD Display & Touch Screen Mounted On CPU Board User I/O 4.6” 3.52’ Connector 5.84” P-9 Viewing Area 4.7’ Mounting 0.150” Dia. Hole Typical PCMCIA Socket Adapter Main CPU (4) Places Bottom Of CPU Printed Circuit Board LCD Color Graphic Printed Circuit Display Board Side View 1.0" Power Connection 1.9" Max. 6 to 12 Vdc. Unregulated On-Board Power Supply & Regulators PCMCIA Socket Mounted Software Dip Main Board On Bottom Switches (5) PCMCIA Mounting Mounting (DB-25M) Points (4) Points Bottom View Analog Inputs (4) & TTL I/O PCMCIA Adapter P-7 (DB-25F) Board Printer Port P-5 (DB-9F) PCMCIA COM-3, P-4 Socket COM-2, P-2 COM-2 COM-1, P-1 Type 2 RJ-11, P-3 422/485 Or Compact & Power PCMCIA Connection Adapter Ejector 6 to 12 Vdc Unregulated Development System ( CE-DEV-SC400 ) R.L.C. offers a development system ( CE-DEV-SC400 ) which provides the necessary hardware and software needed to develop software applications using Microsoft Visual Embedded Tools. The development system is shipped pre-assembled and complete with Windows CE version 3.0 pre-install and ready to run. Demonstration programs are also pre-installed ready to run and are also provided on a separate CD with source/project files included for your own use. The development system provides all hardware required to set up an environment for software development using Microsoft Embedded Visual C++ or Visual Basic. The development system comes with serial port cables, power supply, PCMCIA adapter socket, and the RLC-CD with recovery files, documentation, and demo programs with source code. You must provide your own development computer . R.L.C. will provide everything needed including the Visual Basic and Visual C++ embedded tools. These tools are also available from Microsoft for FREE. Follow the links at our web site ( www. rlc.com ) to get your tools. I/O And User Interfaces Serial Ports (3): PCMCIA Interface: All three serial ports COM-1, COM-2, and COM-3 provide Signals are provided to implement one PCMCIA interface PC compatible (Rx, Tx, RTC, CTS) RS-232 signals. DB-9F to support Ethernet, Modem or ATA FLASH memory cards. locking connectors are provided on the back of the main CPU Software drivers are included in the Windows CE operating board. Standard PC serial cables may be used for direct system. The PCMCIA socket mounts directly on the back of connection to the serial ports. A nul-modem is not required. the main CPU board RS-422/485 Network Port: Parallel TTL I/O: The COM-2 serial port may be used for either RS-232/422 Eight (8) digital TTL input pins or 485 serial communication. Connection to the RS-422/485 Eight (8) Digital TTL output pins feature is provided by an RJ-11 connector on the back side of Signals available at connector P-7 (DB-25M) the main CPU board. Standard phone style network cables may be used to connect to this feature. This feature may be Analog Inputs: used to control Network I/O modules from R.L.C. or for other Six channels of A to D conversion, 12 Bit resolution. custom applications. Signals available at connector P-7 (DB-25M) Signals available at connector P-3 (RJ-11) Parallel Printer Port: User I/O BUS Interface: A locking DB-25F connector is provided on the back of the (8) Data Lines, (3) Address Lines , (2) Interrupt Lines, main CPU board for connection to the enhanced parallel (1) Chip Select, I/O Read, I/O Write printer port. A standard printer cable may be used for connec- RESET, *RESET, 5Vdc, Gnd. tion. Signals available at connector P-5 (DB-25F) Signals available at connector P-9, (20 pin ribbon) Display And Touch Screen Specifications Graphics RGB Color LCD Display: Touch Screen: 1/4 VGA resolution, 320 x 240 RGB STN color Extremely durable glass-like resistive touch screen. Brightness = (180 cd/sq-m) 12-Bit A to D converter used to provide high resolution and Viewing angle = approx. +50/-50 Degrees accuracy. Can be easily calibrated for use with finger, glove, CCFL back light with off/on control to conserve power or stylus. Calibration routines are built into the operating Software controlled contrast adjustment system and can be easly intergrated into your application. LCD power provided by CPU main board General Specifications Power Requirements: Environmental: Unregulated 6 to 12 Vdc 6 to 9 volts recomended, Cooling may be required if higher -10 to +55 C with air flow and no condensation. 330 ma @ 33Mhz, Idol with CCFL back light off CPU Clock Speed: 750 ma @ 33Mhz, Idol with CCFL back light on 1200 ma @ 100Mhz, back light on AMD ELAN SC400 running at 100 Mhz, automatic power management built into CPU. Special Or Custom Orders : R.L.C. will, on special request, re-design the CE-SBC-SC400 to include the I/O functions and interfaces required by your specific application. Size and shape may also be changed to your specifications. Special orders will require minimum quantity purchases and/or NRE charges. Please see our web site for more details. Copyright 2002, R.L.C. Enterprises, Inc. All Rights Reserved. R.L.C. Enterprises, Inc. reserves the right to change specifications and products without notice.