Mobile AMD G-series Dual Core/Single Core AIMB-223 Mini-ITX with VGA/LVDS/HDMI,6COM and Dual LAN NEW Features ƒ Supports AMD Mobile G-series Dual Core/Single Core processor ƒ One 204-pin SODIMM up to 2 GB DDR3 1333 MHz SDRAM ƒ Supports VGA/LVDS/HDMI ƒ Dual LANs, 6COM, Mini PCIe, and Cfast ƒ Supports embedded software APIs and Utilities Software APIs: SMBus H/W Monitor Watchdog GPIO Brightness Utilities: BIOS flash eSOS Monitoring Embedded Flash Lock Security ID Note: eSOS requires ODM BIOS, available by request Specifications CPU AMD Dual Core T56N AMD Dual Core T40 Max. Speed 1.6 GHz (dual core 18W TDP) 1.0 GHz (dual core 5 W TDP) Processor System L2 Cache 512 KB Chipset AMD G-series + A55E BIOS AMI 16 Mbit SPI PCI 1 Expansion Slot Mini-PCIe 1 PCIe PCIe x1 (PCIe gen2) Technology One channels DDR3 1333 MHz Memory Max. Capacity 2 GB Socket 1 x 204 pin SODIMM Controller ATI Radeon HD 6310, support DirectX 11, UVD3 VRAM TBD VGA Supports up to 2560 x 1536 @ 32bpp Graphics LVDS Supports 24-bit dual channel and up to 1920 x 1200 HDMI 1920 x 1200 @ 60 MHz Dual Display Supports dual display of any two display device (CRT, LVDS, HDMI) Interface 10/100/1000 Mbps Ethernet Controller GbE LAN1: RTL8111DL; GbE LAN2: RTL8111DL Connector RJ-45 x 2 Max Data Transfer Rate 6 GB/s SATA Channel 4 Mode None EIDE Channel None SSD Cfast compactFlash Cfast type I/II VGA 1 HDMI 1 Ethernet 2 Rear I/O USB 4 (USB 2.0 compliant) Audio 3 (Mic-in, Line-out, Line-in) Serial 2 (RS-232) DCjack 1 (2.5 mm) LVDS & Inverter 1 USB 4 (USB 2.0 compliant) Serial 4 (RS-232, 5V/12V by jumper selection) IDE None Internal Connector SATA 4 Cfast compactFlash 1 Parallel None GPIO 8-bit Output System reset Watchdog Timer Interval Programmable 1 ~ 255 sec/min Power Requirement Typical TBD Operating Non-Operating Environment Temperature 0 ~ 60° C (32 ~ 140° F) -40 ~ 85° C (-40 ~ 185° F) Physical Characteristics Dimensions 170 mm x 170 mm (6.69" x 6.69") Industrial Motherboards All product specifications are subject to change without notice Last updated : 31-May-2011 USB 2.0/1.1 AIMB-223 Board Diagram Channel A DDR3 1333 MHz VGA PCIe x1 GbE LAN1: RTL8111DL Chrontel CH7511 LVDS AMD G-series 24-bit LVDS PCIe x1 GbE LAN2: RTL8111DL HDMI PCIe x1 Mini-PCIe 300MB/s Cfast Type I/II PCIe x1 slot 4 SATA ports 6 GB/s A55E 8 USB Ports PCI slot HD Audio Realtek ALC892 LPC SPI Super IO Winbond BIOS Fintek F81216D W83627DHG-P PS/2, WDT, 8-bit GPIO, 2 COM 4 RS-232 Ordering Information Optional Accessories Part Number CPU Display LAN COM Part Number Description AIMB-223G2-S0A1E 1.0 GHz CRT/LVDS/HDMI 2 6 1700003195 USB cable with two ports, 17.5 cm AIMB-223G2-S1A1E 1.6 GH CRT/LVDS/HDMI 2 6 1700002204 USB cable with two ports, 27 cm 1700008461 USB cable with four ports, 30.5 cm 1757003064 Adapter AC100-240V, 84W, +12V/ 7A FSP Packing List 1757003062 Adapter AC100-240V, 60W, +12V/ 5A FSP Part Number Quantity AIMB-223 SBC 1 Embedded OS/API SATA HDD cable 2 Serial port cable 2 OS/API Description CPU cooler 1 Win XPE XPE WES 2009 I/O port bracket 1 Software API SUSI V3.0 Startup manual 1 Driver CD 1 I/O View AIMB-223G2-S0A1E AIMB-223G2-S1A1E Online Download www.advantech.com/products Direct Media Interface 20-Gbit/s bandwidth Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control Monitor General Purpose Input/Output is a flexible parallel interface A watchdog timer (WDT) is a device that performs a specific that allows a variety of custom connections. It allows users operation after a certain period of time if something goes wrong to monitor the level of signal input or set the output status to and the system does not recover on its own. switch on/off a device. Our API also provides Programmable A watchdog timer can be programmed to perform a warm boot GPIO, which allows developers to dynamically set the GPIO (restarting the system) after a certain number of seconds. GPIO Watchdog input or output status. ® SMBus is the System Management Bus defined by Intel Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The Hardware Monitor (HWM) API is a system health The SMBus API allows a developer to interface a embedded supervision API that inspects certain condition indexes, such as system environment and transfer serial messages using the fan speed, temperature and voltage. Hardware SMBus protocols, allowing multiple simultaneous device SMBus Monitor control. 2 I C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The Hardware Control API allows developers to set the PWM 2 The I C API allows a developer to interface with an embedded (Pulse Width Modulation) value to adjust fan speed or other 2 system environment and transfer serial messages using the I C devices; it can also be used to adjust the LCD brightness. Hardware 2 protocols, allowing multiple simultaneous device control. I C Control Display Power Saving Make use of Intel SpeedStep technology to reduce power power The Brightness Control API allows a developer to interface with consumption. The system will automatically adjust the CPU an embedded device to easily control brightness. Speed depending on system loading. Brightness CPU Speed Control Refers to a series of methods for reducing power consumption in The Backlight API allows a developer to control the backlight computers by lowering the clock frequency. These APIs allow the (screen) on/off in an embedded device. user to lower the clock from 87.5% to 12.5%. System Backlight Throttling Software Utilities The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status, copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP API for fast implementation into customized applications. server, allowing the administrator to rescue the system. BIOS Flash eSOS The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other for customers to secure their application data within embedded platforms without a BIOS with the “Unlock” feature. Embedded Flash Lock BIOS. Security ID The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. Monitoring All product specifications are subject to change without notice Last updated : 17-May-2011