M13 Multiplexer MX2810 M13 Multiplexer Product Features Backhaul consolidation of T1 remains an detected, the MX2810 will not swap to the important function in network operations. secondary board until it determines that the ■ Affordable DS3 bandwidth With central office space at a premium, failure is hardware-oriented and not a line consolidation carriers need an M13 device that provides failure. This intelligent redundancy feature ■ Built-in 1:1 redundancy cost efficiency, compact size, and built-in minimizes unnecessary hits to the line that ■ Hot-swappable controller ® intelligent redundancy. ADTRAN has other M13 units may allow. cards and power applied its industry-leading expertise in Like all ADTRAN products, the MX2810 supplies developing carrier class products to the offers comprehensive management options, ■ SNMP and Telnet management TM MX2810 M13 multiplexer. The MX2810 including full management and GUI support offers bandwidth consolidation at a low price ■ TL1 alarming and provisioning ® from ADTRAN’s Total Access EMS. It features support and in the smallest footprint available in the a VT100 terminal interface for local configura- industry. Measuring only 1U high in 19-inch ■ Backhaul multiple service tion. To support SNMP and Telnet types (T1/E1) or 23-inch rackmount configurations, this management, the MX2810 has an integrated compact device gives ILECs a powerful tool ■ Smallest M13 form factor 10Base-T Ethernet port. It has an RS-232 port for consolidating 28 T1 signals or 21 E1 available for network management, as well as an signals into a T3 circuit. RS-485 port for daisy chaining multiple units. ■ Dual redundant load sharing DC power supplies The MX2810 houses two hot-swappable TL1 alarming and provisioning are also controller cards capable of combining inde- supported. ■ M13 and C-Bit signaling pendent T1s, E1s, or T1s and E1s on the same support The MX2810 meets the most stringent DS3. The two controller cards also provide NEBS Level 3 requirements. In addition, the ■ Industry-standard CSU and built-in 1:1 redundancy for the DS1 and DS3 NIU loopback codes product is backed by an industry-leading signals, as well as built-in BERT (Bit Error 10-year warranty. ■ NEBS Level 3 compliant Rate Testing) capabilities. When a T1 failure is ■ Industry-leading, 10-year warranty M13 Multiplexer ADTRAN, Inc. 901 Explorer Boulevard MX2810 M13 Multiplexer Huntsville, AL 35806 P.O. Box 140000 Huntsville, AL 35814-4000 MX2810 256 963 8000 voice DS3 256 963 8030 fax 28 T1s/21 E1s Network 877 457 5007 fax back General Information 800 9ADTRAN info@adtran.com www.adtran.com Product Specifications Pre-Sales Electrical Technical Support Mechanical 888 5ADTRAN ■ ■ Power: 48 VDC, 30 W Dimensions: 1.7 in. H x 17 in. W x 7.86 in. D support@adtran.com (4.32 cm H x 43.18 cm W x 19.96 cm D) Regulatory Standards www.adtran.com/support ■ Weight: 5.5 lb (2.495 kg) (fully redundant) ■ NEBS Level 3 Where to Buy ■ FCC Part 15, Class A Interfaces 800 827 0807 ■ NRTL Safety Listed DS3 Network Interface www.adtran.com/where2buy ■ Channelized DS3 Management ■ Post-Sales Line build out: Short (0 to 50 feet), and VT100 Craft Interface Technical Support Normal (50 to 450 feet) ■ DB-9 physical connector 800 726 8663 ■ Framing format: M13 and C-bit parity support@adtran.com ■ EIA-232, PC serial port ■ Line rate: 44.736 Mbps www.adtran.com/support SNMP/Telnet ■ Line interface: 75 ohm BNC coax female connectors ■ Integrated 10Base-T Ethernet Regional Offices DSX-1 Interface Dallas, TX TL1 Alarming/Editing ■ Line build out: 0 to 655 feet 972 830 9070 ■ RS-232 X.25 port ■ Line rate: 1.54 Mbps Denver, CO ■ Ethernet 303 471 9150 ■ Line code: AMI or B8ZS Irvine, CA ■ RS-485 Port Line interface(s): Dual 64-pin Amp connectors 949 260 3500 ■ Allows the daisy-chaining of units Kansas City, KS Clocking 800 471 8649 ■ Network: Receive from DS3 network Alarms Newark, NJ ■ External alarm contacts for Critical, Major, and Minor ■ Local: Internally generated 800 471 8656 alarms Ontario, Canada Diagnostics ■ Normally open pinout 416 290 0585 DS3 Network Quebec, Canada ■ Alarm cutoff switch ■ 877 923 8726 ANSI T1.107 compatible loopbacks San Antonio, TX Environmental ■ Line loopbacks 888 223 7671 ■ Operating temperature: –40ºC to 65ºC DSX-1 Ports ■ Storage temperature: –20ºC to 70ºC ■ International Inquiries Local and network loopbacks ■ Relative humidity: Up to 95 percent, noncondensing +1 256 963 8716 voice ■ CSU and NIU loopbacks +1 256 963 6300 fax international@adtran.com Performance Monitoring www.adtran.com/international Local Network Port Statistics Ordering Information ■ Current 15 minute, 24 hour (96 15-minute intervals), Equipment Part # total for 24 hours and cumulative MX2810 Multiplexer Chassis 1185001L1 DSX Ports MX2810 DS3 Controller Card 1185002L2 ■ BP MX2810 DC Power Supply Unit 1185003L1 ■ LOS ADTRAN is an MX2810 Test Access Module 1185005L1 ■ AIS (loop and carrier) ISO 9001:2000 registered company. MX2810 Redundant System 4185001L5 MX2810 Nonredundant System 4185001L8 ADTRAN is a TL 9000 registered company. Specifications are subject to change without notice. MX2810 is a trademark and 6118500xL1-8C February 2004 ADTRAN and Total Access are registered trademarks of ADTRAN, Inc. All other Copyright © 2004 ADTRAN, Inc. registered trademarks and trademarks mentioned in this publication are the prop- All rights reserved. erty of their respective owners.