Digital Monitor Module System 75 Ohm Interconnect Designed as a flexible solution for network signal management, ADC’s Digital Monitor Module (DMM) system provides a centralized coaxial termination and interconnection point between network elements (NE). The DMM system allows a permanent, dedicated connection between two NEs while providing dual, nonintrusive test access points for bidirectional monitoring of the network signal. Ensuring unsurpassed quality, this interconnect solution features cable management designed to increase reliability, maintain signal flow, and allow easy cable identification. To enhance network flexibility, the DMM system allows modules to be installed in a chassis as network requirements increase. Features: Provides bidirectional, nonintrusive signal testing Supports E1 (2.048 Mbps), E3 (34.368 Mbps), or STM-1 (155.52 Mbps) signal rate applications Modular design allows for capital investment to coincide with revenue growth Mounts in standard 600 mm bays Quality cable management and circuit identification markings www.adc.com +1-952-938-8080 1-800-366-3891 SPEC SHEET Digital Monitor Module System 75 Ohm Interconnect Application The DMM system is used primarily in co-location environments, DDF locations, and customer premises as a connection point between NEs. Each NE is semipermanently cabled to IN/OUT connectors in either the front or rear of each module. The digital signal is accessed through the two MON OUT connectors on the front of each module for testing and monitoring. These dual monitor ports allow access to both directions of the circuit from a single location. This saves valuable technician time when the other side of the termination is located far away, in another room, or is inaccessible. Network Network Element A Element Z DMM OUT Tx OUT MON Z-OUT IN Rx IN  Tx OUT OUT IN Rx IN MON A-OUT Test Unit www.adc.com +1-952-938-8080 1-800-366-3891 2 12/06 103978AE Digital Monitor Module System Digital Monitor Module System 75 Ohm Interconnect Configurations The DMM system is available in several chassis and rack configurations to create a customized interconnect solution. Each module is ordered separately and may be installed in any DMM chassis or rack configuration as the network expands, allowing capital investment to coincide with revenue growth. Modules Multiple connector interface types and locations are available to complement existing network designs. Individual modules allow chassis to easily match existing NE circuit counts. Standard Configuration Up to 12, 24-position chassis are designed to mount in a standard 600 mm rack for a total of 288 circuits. Cable management bars, trays, and labeling are provided on each chassis. High-Density Configuration This uniquely designed dual chassis features two separate compartments, each accommodating up to eight modules mounted horizontally. The two compact compartments are mounted side-by-side in a specially designed dual-column 600 mm rack. This high-density configuration allows a total of 352 circuits in one rack. Cable management bars and four vertical cabling ducts ensure proper routing for high-density cabling. Wall-Mount Box This six-position enclosure serves as an interconnect demarcation point between network providers and customers. Separate locks on each door secure connections from unwanted access. www.adc.com +1-952-938-8080 1-800-366-3891 3 12/06 103978AE Digital Monitor Module System Digital Monitor Module System 75 Ohm Interconnect Modules Features: Front, dual monitor ports on all module styles BNC or 1.6/5.6 connectors provide true 75 Ohm characteristic impedance All module styles are compatable with any DMM 600 mm chassis style Ordering Information Description IN/OUT Connector Locations Catalog Number BNC Rear DMM-BBNCMF BNC Front and Rear DMM-BBNCF BNC Bulkhead Front and Rear DMM-BNCBLK 1.6/5.6 Rear DMM-1656MF 1.6/5.6 Front and Rear DMM-1656F 1.6/5.6 Bulkhead Front and Rear DMM-1656BLK Blank None DMM-BLANK DMM-BBNCMF DMM-BBNCF DMM-BNCBLK Rear and Front View Rear and Front View Rear and Front View DMM-1656MF DMM-1656F DMM-1656BLK Rear and Front View Rear and Front View Rear and Front View www.adc.com +1-952-938-8080 1-800-366-3891 4 12/06 103978AE Digital Monitor Module System Digital Monitor Module System 75 Ohm Interconnect Standard Configuration Features: 288 total circuits in fully loaded bay Cable bars and front cable trays, with cable tie-downs, reduce cable congestion and simplify maintenance Circuit designation labels above connectors and on cable tray ensure proper cable routing and identification Bay equipped with cable troughs, vertical wiring ducts, and equipment cable tie-down bars D3C-0024T Zone 4 earthquake-rated rack with EIA mounting spacing Front View Ordering Information Description Dimensions (HxWxD) Ordering Number Unloaded Chassis 113 x 482.6 x 228.6 mm D3C-0024T accomodates up to 24 modules (4.4" x 19" x 9") 600 mm Skeleton Bay 2200 x 600 x 475 mm IBR-D3C001 accomodates up to 12 modules (86.6" x 23.6" x 18.7") 600 mm [23.6] 449.6 mm [17.7] UPPER CABLE TROUGH 45 RESERVED FOR MISCELLANEOUS APPLICATIONS 40 35 30 25 2200 mm [86.6] 20 15 10 LOWER CABLE TROUGH 5 1 475 mm (18.7") IBR-D3002 Front View IBR-D3002 Side View www.adc.com +1-952-938-8080 1-800-366-3891 5 12/06 103978AE Digital Monitor Module System Digital Monitor Module System 75 Ohm Interconnect High-Density Configuration Features: Improved circuit density by 20%; 352 circuits in fully loaded bay Cable bars reduce cable congestion and simplify maintenance Circuit designation label door ensures proper cable routing and identification Bay equipped with four vertical cabling channels, D3C-0016HD cable troughs, and equipment cable tie-down Front View bars for high density cable management Zone 4 earthquake-rated equal-flange rack with EIA mounting spacing Ordering Information Description Dimensions (HxWxD) Ordering Number Unloaded Pair of Dual Chassis 88 x 236 x 165 mm D3C-0016HD accomodates up to 16 modules in two, eight-position chassis (3.5" x 9.3" x 6.5") 600 mm Dual Skeleton Bay 2200 x 600 x 250 mm IBC-D3C001 accomodates up to 11 dual chassis (86.7" x 23.6" x 23.6") IBC-D3001 IBC-D3001 Front View Side View www.adc.com +1-952-938-8080 1-800-366-3891 6 12/06 103978AE Digital Monitor Module System Digital Monitor Module System 75 Ohm Interconnect Wall-Mount Box Features: Used as a demarcation point when NEs are supplied by the service provider and by the customer premises Seperate locks on each door secure connections from unwanted access D3C-WBOX06 Front View Ordering Information Description Dimensions (HxWxD) Ordering Number Unloaded Wall-Mount Box 267 x 203 x 114 mm D3C-WBOX06 accomodates up to 6 modules (10.5" x 8" x 4.5") Note: Modules are ordered seperately www.adc.com +1-952-938-8080 1-800-366-3891 7 12/06 103978AE Digital Monitor Module System Specifications ELECTRICAL Insertion Loss Better than -.5 dB, 100 KHz to 100 MHz Better than -.8 dB, 100 MHz to 300 MHz Return Loss: Better than -20 dB, 100 KHz to 300 MHz Monitor Loading Effect: < .4 dB change in insertion loss to 300 MHz Monitor Level: 21.5 ± 1.5 dB, 100 KHz to 300 MHz Isolation: < -55 dB at 22.368 MHz Cross Talk: < -55 dB at 22.368 MHz Phase Delay < 4 nanoseconds to 300 MHz Pulse Template: Conform to CCITT Recomm. G.703 MECHANICAL Retention Force: 7 lbs. minimum Retention Torque: 4" per lbs. minimum ENVIRONMENTAL Thermal Shock: -40ºC to +60ºC operating -55ºC to +85ºC non-operating Moisture Resistance: 0% to 95% Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 For a listing of ADC’s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 103978AE 12/06 Revision © 2002, 2006 ADC Telecommunications, Inc. All Rights Reserved SPEC SHEET