www.adckrone.com 1st Edition Fibre Connectivity Solutions EMEA Fibre Cover 8/16/05 8:09 AM Page 1 FlexDSX™ Cross-Connect Products Exclusive CD edition March 2006 Telecommunication networks are not static. The FlexDSX system presents several key In order to support evolving service offerings, advantages in comparison to standard DDF they must evolve in size, shape and complexity. systems. Initial network design should consider the • Floor space saving: Higher number of need for expansion and growth. Proper design terminations per rack contributes to typical plays a critical role in determining whether a floor space savings of up to 50% network is an effective revenue generator, or • Maintenance time savings: Reduce whether it loses profitability through excess routine maintenance time and labour costs and missed service opportunities. troubleshooting during FlexDSX™ cross-connect products provide the – Circuit identification necessary network flexibility. In addition to – Circuit testing (both out-of-service and linking copper-based electrical network in-service) elements, FlexDSX products provide access to – Circuit monitoring active digital circuits for nonintrusive – Service restoration monitoring, test access and patching. By – Implementing new equipment creating a lineup of skeleton bays and filling – Relocating service to new equipment the bays with chassis and modules only as needed, you can defer capital expenses until • Long-term connection reliability: the equipment is ready to create a revenue Prevents network downtime and increases stream. quality and service availability Internet: www.adckrone.com For a listing of ADC’s global sales office locations, please refer to our web site. ADC GmbH, Beeskowdamm, 3-11, 14167 Berlin, Germany Phone: +49-(0)30-8453 1818 Fax: +49-(0)30-8453 1703 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are contin- uously improving our products, ADC KRONE reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our world headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. 1317439 8/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved FIBRE CONNECTIVITY SOLUTIONS 2 Mbps DSX Front Cross-Connect Solutions ™ ™ ADC 600 mm Skeleton Bay for FlexDSX , PxPlus and DSX64 Panels The 600 mm skeleton bay is designed for FlexDSX, PxPlus and DSX 64-termination panels. The fully- assembled bay meets the standard ETSI 600 mm wide x 2.2 meter tall footprint for easy office planning. Rack mounting will also accommodate standard 48.26 cm (19 inch) panels. Fuse panels and all the necessary cable management are factory-installed in the bay, making ordering and installation fast and easy. DSX panels are added in the field as needed. OUT (Tx) and IN (Rx) cable ways for equipment terminations support the use of either 120 Ohm twisted pair or 75 Ohm coaxial cable. The skeleton bay can be mounted on either concrete or raised floor. Extra rack space reserved for miscellaneous applications (such as cross aisle panels or monitor panels) or for additional DSX panels (up to [832] 2 Mbps terminations) High-density supports up to (12) 5.25-inch (13.34 cm) panels or (768) 2 Mbps terminations (120 Ohm or Panels mount over the rings – 75 Ohm) per bay no need for removal of rings during installation Single part number simplifies ordering and installation All metric hardware allows easy replacement for misplaced screws Rings and troughs – preprovisioned jumper management ensures existing wiring is not disturbed during expansion or maintenance Cable tie down bars on the rear of the bay eliminate the need for filler panels and end guards 600 mm width aligns perfectly 600 mm with raised floor tile dimensions and simplifies office engineering and planning 600 mm Skeleton Bay 600 mm Empty Skeleton Bay Front Jumper Rings (shown with panels installed) Ordering Information Description Description Catalog Number Skeleton bay front cross-connect Skeleton bay front cross-connect IBF-RSC021 Note: Bays come fully-loaded with cable troughs, cable rings, fuse panel and grounding kits. The bay holds up to nine 7-inch (17.78cm) high modules. www.adckr one.com • +49-(0)30-8453-1818 1 2 Mbps DSX Front Cross-Connect Solutions ™ FlexDSX Introduction The FlexDSX platform from ADC embodies the ultimate flexibility in circuit access. The 4-port jack card provides dual monitor capability. Dual monitoring allows nonintrusive monitoring in both directions of a 2 Mbps signal from a single DSX location. Monitoring a circuit in both directions from a single DSX location will save time when troubleshooting the network because test gear isn’t moved to a second DSX location to test the complete circuit. Dual monitoring also gives access to complete circuits when the other end of the cross-connection is not available, as in the situation where collocation of two carriers exists and the cross-connection between DSX provide the point of interconnection. FlexDSX products also provide flexibility in deploying your resources. The completely modular design allows you to deploy modules and chassis on an as-needed basis. By creating a lineup of skeleton bays and filling the bays with chassis and modules only as needed, you can defer capital expenses until the equipment is ready to create a revenue stream. In today's multinational, multiservice environment, FlexDSX products offer a variety of standard terminations. From wire-wrap to coax to RJ45 connectors, FlexDSX products offer the option to terminate 2 Mbps equipment from a single location. Features • Conduct protocol testing for both OUT and IN transmission directions from one location – saves time when testing a circuit • Staggered jack alignment – allows industry standard patch cords to be used side-by-side in high density products • Jumper rings and rear cable bars are installed on the skeleton bay – provides superior cable management • OUT/IN equipment cable terminations on the backplane are modular in groups of four – allows for multiple circuit count configurations (56, 64, 84) • Works with twisted pair or coax cabling; choose wire-wrap, BNC or 1.6/5.6 interfaces – flexibility to meet a variety of needs • Coax and 120 Ohm connections provide the flexibility to connect 75 Ohm equipment to 120 Ohm equipment ™ FlexDSX Application LED Network Network Tracer FlexDSX Element A FlexDSX Element B Wire MON MON M OUT OUT X-OUT X-OUT Tx OUT Tx OUT O OUT OUT IN IN I IN IN Rx IN Rx IN X-IN X-IN MON MON Typical DSX Semi- Permanent PERMANENT PERMANENT Cross EQUIPMENT EQUIPMENT Connect CABLE CABLE Jumper Test Box FlexDSX products provide the convenience and time-saving feature of testing and monitoring the signal in both directions from one location. www.adckr one.com • +49-(0)30-8453-1818 2 2 Mbps DSX Front Cross-Connect Solutions ™ FlexDSX Panels – Four-Port (Dual Monitor) Jack Access FlexDSX panels are the only DSX panels in the industry that offer individual, removable jacks, removable OUT/IN equipment cable terminations, and four-port (bidirectional) test access capabilities. The four-port jack system consists of OUT and IN jacks for direct access to the network element’s input and output signals, and DUAL MONITOR jacks for monitoring of the signal in both directions simultaneously at a single location. Dual monitors are especially beneficial for testing when the other side of the cross-connect is located far away, in another room, or is inaccessible (i.e., collocation). FlexDSX Front View FlexDSX Rear View (1.6/5.6 Balun version shown) Large labels provide clear documentation of circuits 64-terminations per panel (Balun and twisted Chassis are configured with OUT/IN interfaces pair) – matches 2.048 Mbps equipment in groups of four for easy removal and cabling breakouts minimal disturbance of adjacent circuits Large front trough avoids cable build-up Staggered jacks allow industry standard patch cords to be used side-by-side Tracer LED eliminates manual tracing of circuits for faster circuit identification Four-port (dual monitor) Individual jacks allow quick isolation removable of problems in larger jacks applications where the cross-connect may be located far away or is inaccessible FlexDSX four-port jack card FlexDSX panel with individual jack card pulled out www.adckr one.com • +49-(0)30-8453-1818 3 2 Mbps DSX Front Cross-Connect Solutions ™ FlexDSX Panels – Four-Port (Dual Monitor) Jack Access Ordering Information Ordering Information Description Catalogue Number Fully-loaded chassis (front / rear access) 5.25'' (13.34 cm) high, 19'' (48.26 cm), EIA/IEC mounting 120 Ohm wire-wrap equipment interface DFX-100001 BNC Balun equipment interface DFX-210001 1.6/5.6 Balun equipment interface DFX-220001 SMB DFX-230001 Type 43 DFX-240001 1.0/2.3 DFX-250001 RJ45 DFX-400001 Shielded RJ45 DFX-500001 ® LSA-PLUS DFX-800008 Fully-loaded chassis (all-front-access), 120 Ohm Wire-wrap DFX-1F0001 ® LSA-PLUS DFX-8F0008 Module and Card 4-Port Jack Card with 4-Pack Module 4-Pack Module 4-Pack Module 4-Pack Module 4-Pack Module with 1.6/5.6 connectors with wire-wrap connectors with BNC connectors with LSA-PLUS contacts Ordering Information Description Catalog Number FlexDSX 64-position empty chassis 19" (482.6mm) x 5.25" (133.35mm) (3RU) DFX-9E0002 4-pack modules Wire-wrap, front cross-connect, 120 Ohm DFX-9E1000 BNC, front cross-connect, 75 Ohm DFX-9E2000 1.6/5.6, front cross-connect, 75 Ohm DFX-9E3000 RJ45, front cross-connect, 120 Ohm DFX-9E4000 Shielded RJ45, front cross-connect, 120 Ohm DFX-9E4000-S SMB, front cross-connect, 75 Ohm DFX-9E5000 Circuit cards FlexDSX jack, odd DFX-1 4-Port Jack Card FlexDSX jack, even DFX-2 www.adckr one.com • +49-(0)30-8453-1818 4 2 Mbps Digital Cross-Connect System ™ All-Front-Access FlexDSX Panels The all-front-access FlexDSX product family, designed for 2.048 Mbps cross-connect applications for the standard 600 mm footprint, provides 0.045" (1.14 mm) square wire-wrap pin interface options on both the cross-connect and equipment fields and is available with or without performance monitoring. Each chassis holds up to 16 four-circuit front access module packs. No internal wiring is required between modules and the chassis or between adjacent modules. Each of the 64 individual jack cards in a fully-populated chassis have four bantam-sized ports—monitor OUT, OUT, IN, and monitor IN, as well as a red flashing tracer lamp. Monitor network resistors provide 120 Ohm impedance. FlexDSX chassis without performance monitoring (Front View) Four-Pack Modules FlexDSX chassis with performance monitoring (Front View) Four-Pack Modules Ordering Information Description Catalog Number All-front-access FlexDSX panels Empty rack (holds 10 DFX-1F0001 chassis) DFX-RSFA04 Fully-loaded panel DFX-1F0001 Empty chassis DFX-9E0003 Four pack module DFX-9F1000 All-front-access FlexDSX with performance monitoring Empty rack (holds 8 DFX-1F0001-DPM chassis) DFX-RSFA03 Fully-loaded panel DFX-1F0001-DPM Empty chassis DFX-9E0003-DPM Four pack module DFX-9F1000-DPM www.adckr one.com • +49-(0)30-8453-1818 5 2 Mbps Digital Cross-Connect System Bay Hardware and Accessories End Guard These 2.2 m high end guards provide protection and a finished appearance at the start and end of the lineup. Ordering Information Description Catalog Number 450 mm deep end guard RAC-EGK450* 600 mm deep end guard RAC-EGK600* 300 mm deep end guard RAC-EGK300* * Each kit comes with two end guards DSX Frame Doors The door kit provides left and right doors for the front and rear of the DSX frame. Also included are top, front, and rear brackets for mounting of the doors to the frame. Ordering Information Description Catalog Number DSX frame door kit IBF-1ENCDOR End Guard for Use with Door Enclosure Kit This end guard kit is used in conjunction with the DSX frame doors used to enclose the frame. It also provides protection and a finished appearance to the start and end of the frame lineup. Ordering Information Description Catalog Number End guard for use with DSX frame door kit IBF-1ENCEG Filler Panel Kits The filler panel kits add spacing between DSX frames. The kits come in 150 mm and 300 mm measurements. Ordering Information Description Catalog Number 150 mm filler panel kit SFK-122150 300 mm filler panel kit that includes upper and lower SFK-122300 cable trough www.adckr one.com • +49-(0)30-8453-1818 6 2 Mbps Digital Cross-Connect System Bay Hardware and Accessories Rack Installation Kit This rack installation kit comes with all the necessary hardware to install the DSX rack in a raised floor environment. Ordering Information Description Catalog Number Zone 2 raised floor mounting kit RAC-MX0615 Concrete floor kit RAC-MX0616 Note: See installation guidelines for instructions on mounting the DSX Frame. AC Outlet Kit This AC outlet kit is a universal continental Europe outlet that mounts in the base of the frame. Ordering Information Description Catalog Number UK AC outlet kit AUX-AC0003 Continental Europe AC outlet kit AUX-AC0004 North American AC outlet kit AUX-AC0005 Cross Aisle Panels Ordering Information Description Catalog Number 128-circuit cross aisle panel AUX-200022 64-circuit cross aisle panel with trace LEDs AUX-200064 Alarm Panels Ordering Information Description Catalog Number 64-circuit all front access panel AUX-000040 www.adckr one.com • +49-(0)30-8453-1818 7 2 Mbps Super High Density Solutions Accessories Bantam Patch Cords Ordering Information Description Catalog Number Three conductor* Single 1' (.3 m) PJ712 1.5' (.46 m) PJ713 2' (.61 m) PJ714 2.5' (.76 m) PJ715 3' (.91 m) PJ716 4' (1.22 m) PJ718 5' (1.52 m) PJ720 6' (1.83 m) PJ722 PJ1208 8' (2.44 m) PJ1210 PJ768 10' (3.05 m) PJ1212 Three-Conductor Dual Patch Cord 12' (3.66 m) PJ1415 15' (4.57 m) PJ1420 20' (6.1 m) PJ1425 25' (7.62 m) PJ1430 30' (9.15 m) PJ1450 50' (15.24 m) Dual* 1' (.3 m) PJ762 2' (.61 m) PJ764 2.5' (.76 m) PJ765 3' (.91 m) PJ766 4' (1.22 m) PJ768 5' (1.52 m) PJ770 6' (1.83 m) PJ772 8' (2.44 m) PJ1308 PJ718 10' (3.05 m) PJ1310 Three-Conductor Single Patch Cord 12' (2.66 m) PJ1312 14' (4.27 m) PJ1514 20' (6.1 m) PJ1520 25' (7.62 m) PJ1525 30' (9.15 m) PJ1530 35' (10.68 m) PJ1535 45' (13.73 m) PJ1545 Patch cord kit International patch cords kit ACK-INTL International patch cords kit, nickel-plated ACK-INTL-N * For nickel plated patch cords, add the suffix “N”. For plenum-rated fire retardant patch cords, add the suffix “PL”. www.adckr one.com • +49-(0)30-8453-1818 8 2 Mbps Super High Density Solutions Accessories Tools and Tool Kits Ordering Information Description Catalog Number Manual wire-wrap kit includes: AUX-0X0165 Manual wire-wrap kit 22-24 AWG wire-wrap bit sleeve 24-26 AWG wire-wrap bit sleeve 22-24 AWG wire-wrap bit 26 AWG wire-wrap bit Mannual wire-cutting/stripping tool AUX-0X0803 Manual unwrapping tool (screw driver tool) AUX-0X0802 Manual unwrapping tool (soft, ergonomic handle) AUX-0X0381 Unwrapping sleeve for use with AUX-0X0381 AUX-0X0383 Electric 220 wire-wrap gun AUX-0X0466 22-24 AWG bit (0.64 - 0.51mm) AUX-0X0467 22-24 AWG sleeve (0.64 - 0.51mm) AUX-0X0468 Cross-Connect Wire Ordering Information Description Catalog Number Cross-connect wire, 500-foot roll (150 m) DSX-CCW/500 Cross-connect wire, 1000-foot roll (300 m) DSX-CCW/1000 Cross-connect wire, 1500-foot roll (450 m) DSX-CCW/1500 Cross-connect wire, 2000-foot roll (600 m) DSX-CCW/2000 www.adckr one.com • +49-(0)30-8453-1818 9 Internet: www.adckrone.com For a listing of ADC’s global sales office locations, please refer to our web site. ADC GmbH, Beeskowdamm, 3-11, 14167 Berlin, Germany Phone: +49-(0)30-8453 1818 Fax: +49-(0)30-8453 1703 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are contin- uously improving our products, ADC KRONE reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our world headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. 1317439 8/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved